Best 2 Stroke Oil for Chainsaw (2 Cycle oil)

If you use quality chainsaw oil, you guarantee the trouble-free operation of your machine. The gearbox, piston or connecting rods, for example, need a proper lubricant, which is obtained by adding oil to petrol in a certain proportion. Using clean fuel greatly reduces the service life of these components.

For internal combustion engines, the optimal option will be an oil composition, which has the following advantages:

•     Minimum zoning.
•     Resistance to negative temperatures.
•     Good density.

2-stroke VS 4-stroke

The biggest difference between two-stroke and four-stroke oils is that two-stroke oils must be mixed with petrol. This is because four-stroke engines have an automatic lubrication system that two-stroke engines do not have.

So what happens if you try to use 4-stroke oil in a situation where you should use 2-stroke oil? Well, the main thing is that there is a greater build-up of soot, which affects the performance of the engine by making it less efficient and increasing the likelihood of clogging.

Things to consider before buying

Engines are not suitable for use with any oil. They are choosy when it comes to their lubricant. You would have a bar of oil that would go perfectly with one engine, but if you apply it to another engine, it might end up making the engine weak.

That is why it is important that you buy the right oil for your chainsaw. However, it has become quite a task to choose from all these products that the market has to offer.
As all these products have attractive properties, you will sometimes be so confused that you simply give up caring. Therefore, in the end, you end up buying things indiscriminately, which is not the ideal way to go about it.

It is not easy to choose something from the abundance of products, especially if there are very small differences in properties. But don’t worry, because we are here to help.
We will tell you the characteristics that make quality bar oil for chainsaws. There are a few things you need to consider before buying the product:

• Safety
  Of all things, safety comes first. So how safe is the 2-cycle oil you want to buy?
  Avoid oil that contains dangerous toxic chemicals that can react on skin contact. This is very important.
• Budget
  If you are willing to pay a good amount of money to get the best quality, you should choose the product of a well-known brand. However, if you cannot afford much and at the same time, you want to get a good deal, this is also possible.
  The market is not only about expensive products. There are enough opportunities to buy products at a reasonable price.
  Although the oils from the list differ in cost, they are all very suitable.
• Types of engines
  It is extremely important to check the type of engine in question. Lubricants have different properties and are produced for specific engine types. If your chainsaw is equipped with a low combustion engine, it makes no sense to use high combustion additives.

This is because these additives are suitable for 4-stroke engines, not for 2-stroke engines. Ester oil is included in the delivery. What you have to consider is zinc, which is notorious. For two-stroke engines, you should therefore opt for oil-containing additives with low combustion.

No matter what your saw is going to need oil for it to work properly. So do yourself a favor and buy any the following best 2 stroke oil for chainsaws to ensure a long lasting and smooth operation for all of your cutting needs.

Stroke Oil For Chainsaw Best Choise

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

2-stroke engines are mainly found in lawnmowers, mopeds, chainsaws, mopeds and scooters. In order that these do not suffer premature damage, they must be lubricated – just like cars. Unlike in a car, however, the engine oil (in this case a 2-stroke engine oil) does not work alone, but must be mixed with the petrol. In this case, the petrol/oil mixture provides both the fuel supply and lubrication.

Best 2-stroke oils for chainsaw

1. Makita Bar and Chain Oil

Buy Makita Bar and Chain Oil

View on Amazon

Makita, a leader in outdoor energy equipment, offers a range of tools and accessories to keep your OPE strong. For the highest cutting performance, Makita bar chain oil reduces heat and friction for efficient cutting and longer bar and chain life. This versatile oil improves lubrication in hot or cold climates. To increase efficiency, stock up on the handy gallon size for the season.

Pros:

• Reduces wear on bar, chain and sprocket for longer bar and chain life
• Reduces heat and friction for efficient cutting
• Year-round formula for improved lubrication in hot or cold climates
• Ideal for use with Makita gas and electric chain saws

Cons:

• It’s better to use in warmer weather

2. MAG1 Premium Bar & Chain Lubricant

Buy MAG1 Premium Bar & Chain Lubricant

View on Amazon

With FMX technology – friction management for Xtreme protection. MAG 1 offers unsurpassed protection and performance.

The MAG 1 bar and chain oil is specifically designed to protect your chainsaw. The tackifier helps to keep the oil on the chain even at high temperatures and/or high speeds. MAG 1 offers excellent control of friction and wear. Advanced molecules combine to form a wear-resistant shield that forms barriers that reduce friction and wear. MAG 1 lubricants provide unsurpassed protection even under the harshest conditions in hot and cold climates and environments.

Pros:

• Prevents wear
• Protects at low temperatures
• Sticks to the chain even at high temperatures and speeds

Cons:

• None

3. Husqvarna Premium Bar & Chain Oil

Buy Husqvarna Premium Bar & Chain Oil

View on Amazon

It is a gallon of chain and bar oil of the highest quality. You can use it with any of Husqvarna’s chainsaws. The outstanding feature is that it is supplied with a mixture of basic stocks to reduce waste.
They have made it very sticky to keep the chainsaws running efficiently. At extreme temperatures, this bar oil is most commonly used.

When you are busy with cutting jobs, you always want them to be done quickly. A gallon of chain oil like this will be useful in this case. Because it shortens the cutting time by making the saw much more efficient. This is done by reducing heat and friction.

In terms of affordability, there should be no problems. It is inexpensive, but still delivers high performance.
The thickness with which it is delivered is not too much or too little, but simply perfect. Therefore, you can use it on chainsaws at any time of the year.

You will find that it is tough enough to keep the chainsaws running well. Because of all these properties, we highly recommend this chainsaw bar oil.

Pros:

• Inexpensive, if performance is taken into account
• High viscosity and tackiness
• Reduces the cutting time considerably

Cons:

• Not supplied with anything to prevent overflow

4. Oregon Premium Bar & Chain Oil

Buy Oregon Premium Bar & Chain Oil

View on Amazon

You will find that the oil is strong enough to prevent rust or abrasion of the chain link. As for stickiness, you will not have the opportunity to complain about it. This is because the machine does not produce many drops in hot or cold weather.

It will also help to achieve a good cutting performance and shorten the cutting time.

Zinc may be a good additive to prevent wear, but it is not suitable for engines that run on polybutene. Since this chainsaw oil contains a sufficient amount of polybutene, you can use it for any type of engine in different weather conditions.

In addition, this chain oil makes a good contribution to reducing the friction that a chain saw has to run through. This makes the engine more powerful. The result is an impressive cutting performance of your chainsaw. With this thick oil, there is no sap, no pitch and no clogging of the chain.

This product can be expensive when you consider the prices of other chain oils on the market. However, the versatility it offers makes it worth the price. You can also use it for bar and jaw saws.

Pros:

• Great stickiness
• Prevents corrosion and rust
• Environmentally friendly, leaving little or no residue

Cons:

• Dries out quickly if not used in time

5. Husqvarna X-Guard Premium All-Season Bar & Chain Oil

Buy Husqvarna X-Guard Premium All-Season Bar & Chain Oil

View on Amazon

Husqvarna X-Guard Premium bar and chain oil is designed to provide optimum protection for cutting equipment when operating a chainsaw. Husqvarna’s X-Guard lubricant, which is made from new base oils, reduces friction and wear on the saw bars and chains, extending the life of cutting equipment. X-Guard’s reduced sling formulation contains a premium tackifier additive that ensures that lubrication of cutting equipment is maintained for optimum performance. Husqvarna’s X-Guard all-season formula provides excellent protection for cutting equipment when operating a chainsaw in all conditions.

Pros:

• Extends the life of the bar, chain and sprocket
• Performance throughout the year
• Reduces friction and wear
• High adhesive strength reduces oil slings
• For use with all chainsaws

Cons:

• The container may be leaking

6. STP Bar & Chain Oil

Buy STP Bar & Chain Oil

View on Amazon

STP Premium Bar & Chain Oil helps to maintain the maximum performance of bars and chains for chainsaws. Scientifically developed with anti-wear technology to reduce bar and chain wear and a tackifier to reduce oil spillage at high speeds. Its premium formulation also helps minimize resin deposition for smoother cuts. The oil is ready to use immediately. This is not an engine lubricating oil.

Pros:

• Formulated for use with chainsaws to obtain maximum bar and chain performance
• The mixture is immediately ready for use
• Anti-wear agent helps to provide a protective layer for the chain saw blade and chain
• Tackier contributes to the reduction of high-speed oil spillage
• High quality base oil specially formulated to minimize resin build-up for smoother cuts

Cons:

• Difficult to find in the store

7. Maxpower Bar and Chain Oil

Buy Maxpower Bar and Chain Oil

View on Amazon

With this 1-gallon chain oil you save a healthy amount of money. In terms of quality and durability, this is the best bar and chain oil available on the market. Once you get your hands on this oil, you will most likely not use any other bar oil.

You have introduced an additive into it that is wear resistant. If you touch it, you will find it sticky. You would assume that it is the viscosity that comes into play, but you would not be right.

It will come in handy if you are left with dried-out oil that you bought earlier. With this oil, you will have a backup. If you are concerned about handling a large bundle of wood, this chain will help you and make your job easier.

In addition, it offers all these advantages, although it is inexpensive. The features it offers may not be too fancy, but if you happen to own a cordless unit of a chainsaw, you will not want to switch to another stick oil.
It seems to be an excellent product when it comes to stickiness.

Pros:

• Excellent work with cordless chainsaw units
• Wear-resistant additives ensure the durability of the chain
• Pocket friendly

Cons:

• Stickiness suggests viscosity, although this is not the case

8. Stihl Platinum Bar And Chain Lubricant

Buy Stihl Platinum Bar And Chain Lubricant

View on Amazon

Do not allow friction to affect the performance of your chainsaw. The STIHL bar and chain oil is specially formulated for the adhesion of the bar and chain of your chainsaw and ensures optimum lubrication. Special oils prevent sap and pitch from sticking, thus extending the cutting performance and service life of your chain parts. Ideal for use at moderate temperatures, STIHL bar and chain oil offers high-quality protection for your chainsaw.

Pros:

• Original OEM-Stihl part
• Contains highly refined oils for maximum lubrication
• Developed for high-speed heavy-duty cutting
• Contains a concentrated tackifier additive to keep the oil on the saw-chain at high cutting speeds.
• Extends the life of chain saw bars and saw chains

Cons:

• The price is too high

9. Echo Bar & Chain Oil

Buy Echo Bar & Chain Oil

View on Amazon

The ECHO 1 Gallon Bar & Chain Oil will keep your chain saw sharp and well lubricated. It has a viscosity index of 150 and a pour point of -40 degrees Fahrenheit for year round use. It increases lubrication and reduces resin formation. It prevents heat generated by the friction between bar and chain and helps remove chips and dust. This

ECHO 1 gallon bar and chain oil can be used with most chainsaws.
It is a synthetic oil with a fuel stabilizer and strong detergents to remove existing carbon deposits.
Synthetic oil has proven to be the best oil for two-stroke engines. This is because petroleum-based oil leaves many deposits on spark plugs.

In addition, petroleum-based two-stroke oil has high emissions compared to synthetic oils. Because it is natural oil, petroleum-based oil has rich blends of solvents that contribute to its deposits and emissions.

On the other hand, synthetic oils are blended to protect the engine from deposits due to their low ash content and additives. This increases the life of your engine and reduces its maintenance costs.

Even if it costs a little more, at least you know that your engine is protected. This is why landscapers, homeowners and professional racing teams would prefer to buy Echo Original OEM Red Armor 2 Cycle Oil because of its high quality and performance.

Pros:

• Comes with practical pouring handle and oil level indicator
• Improves lubrication with simultaneous reduction of gumming
• All-weather operation
• Removes unwanted dust and chips

Cons:

• Make sure you wear your work clothes, because the extra viscosity and wood shavings will create lumps that will find your boots, trousers and shirt

10. Poulan Pro Bar and Chain Oil

Buy Poulan Pro Bar and Chain Oil

View on Amazon

It is resistant to high temperatures and rust. When the temperature is low, it can flow freely. The wear-resistant property helps to prevent chains from jamming.

You would notice some red tones in it. We are talking about mineral oil. There is a red dye in it, which at first sight does not seem necessary, but if you want to cut through a tree trunk, it will.

The oil will last longer than most other chain oils. This is due to the incomplete strength of metals. They contain small pores.

Once the oil has passed through the pores, it will stay there for a long time. This gives you a head start for your next project. You will then not have to deal with a completely dry metal.

The lubricants are manufactured in such a way that they can be used on different machines for different purposes. It is always the case that the lubricant gets along better with the machine than the brand name oil. This bar oil will be a good option for 2-stroke engines.

Pros:

• Prevents the chain from jamming
• The red dye ensures correct lubrication
• Great price

Cons:

• It could be a little thicker

2 stroke oil for chainsaw video:

Frequency of use of the chainsaw

The type of machine you want to use is also an important consideration when choosing the top 2-stroke oil. This is necessary because the oil model that works for a particular machine will end up damaging another machine. On the other hand, the type of work you do is a necessary consideration. Remember that you need more oil if you use your machine, especially the chainsaw, for hours every day. It is therefore best to determine the amount of oil your machine uses regularly. This way you will always have enough oil in stock.

If you work in the professional sector, you will always need a lubricant. In extreme weather conditions, it is rather necessary. Because nothing is more annoying than being left behind with an empty reservoir. Therefore, it would be better if you could buy lubricants from different companies. You should buy both high and medium-grade oils. However, if you are a do-it-yourselfer who occasionally uses a chainsaw, a small gallon would be better. Otherwise, you would be wasting oil by letting it dry out.

Popular chain saw models

If you are in the market for a chain saw, you may not know which model is right for you. There are now a number of options on the market, including gas-powered, wired, and battery-powered chainsaws. Not only must you choose what type of power the machine uses, but you must also consider blade length, ease of use, and maintenance.

• Top choice
  The WORX WG303.1 16-inch 14.5 amp electric chain saw is an easy choice for our top selection. This model is designed specifically for the type of work the average homeowner is likely to need a chainsaw for, from pruning branches and trees to cutting firewood. However, it can also handle larger tasks when these are required, such as felling smaller trees and clearing paths of storm-fallen trees. This chainsaw can handle just about any task, but at its core, it is built for maximum ease of use. An automatic tensioning system helps tension the chain, an automatic oiler keeps the saw lubricated, and an automatic kickback prevention brake ensures your safety.
  Of all saws, this is the one where the homeowner is at the top of the construction, and that is why it is our top choice. If you do not intend to cut a significant piece of wood, this saw should be able to keep up with any gardening work or projects near your house, cottage, or farm.
• Premium selection
  If you are looking for heavy-duty chainsaws that can handle any challenge, the Husqvarna 455 Rancher is probably the ideal choice for you. Do not let its size fool you: although it only weighs about 13 pounds, the Rancher is a heavy hitter. With its 55.5 cc engine and large 20-inch pole, it has a powerful punch that allows it to fell trees as needed and prepares firewood with minimal effort. Although the performance of the Husqvarna is almost equal to even the most powerful gas-powered machines, you do not have to worry as much about the Husqvarna’s environmental credentials.
  Its X-Torq engine reduces fuel consumption by up to 20 percent and emissions by up to 60 percent, making it more energy-efficient and environmentally conscious than many competing products. While the WORX WG303.1 is the first choice for homeowners with medium or small jobs, those who need a little more power in their saw should consider the Husqvarna 455 Rancher; it is the best choice for those who need a little more.
• Great value
  The Remington RM1425 “Limb N Trim” electric chainsaw is without a doubt the best cut for your money. The fact that this product can be bought new online for less than $50US is almost outrageous. Surely, you will not be able to slay a mighty oak with it, but you can be sure that you can handle all your normal daily gardening tasks that will come your way.
  The 8-amp motor and 14-inch guide may not come close to some of the heavy hitters on this list, but they are more than enough to make this little chainsaw the first choice for the best value. It is small, light, comfortable, and easy to handle. There is a reason why this saw is called “Throwing Arm N Trim”, it knows what it is and it is the best at it. Moreover, honestly, what more could you ask for, especially at this price?

2-stroke engines are an engine type found in most gas-powered chainsaws. They work because one cycle consists of two movements of the pistons. Their advantages over 4-stroke engines are that they are lighter, so they are more suitable for hand tools such as chainsaws.

On this list today, we have dealt with 2 stroke oils, which in our personal opinion are the best on the market. However, this does not mean that they are the only ones. It will always be a good idea to have a look at what else is on the market.

Top brands oil for chainsaw

PENNZOIL chainsaw oil

This company, based in Houston, Texas, has been in existence since 1913 and develops innovative formulations for all your motoring needs. As an international company, Pennzoil is one of the market leaders in the production of engine oil, transmission oil, and transmission fluid. One of the most popular products is the Marine XLF engine oil.

ROYAL PURPLE chainsaw oil

Royal Purple is a company that produces exclusively synthetic motor oils. Royal Purple manufactures a wide range of high-performance products that help keep your motorcycle engine running smoothly. The specialty products of the company, based in Porter, Texas, include high-quality two-stroke oils. The bestseller in the range is the HP 2-stroke high-performance oil.

REDLINE chainsaw oil

Red Line, based in sunny California, manufactures exclusively synthetic oil products for both cars and motorcycles. The company’s philosophy is to keep your engine running smoothly and optimally by using its quality products. Look at the 2-stroke racing oil.

CERTIFICATION chainsaw oil

If you are looking for high quality, your oil should be ISO I-EGD or Jaso FD certified. Cheaper oils are usually certified to API-TC standards, but you will want something a little better than the base oils. This will keep your engine at peak performance, protected from damage, and kept clean.

SYNTHETIC VS. NATURALLY

Most two-stroke oils are available in synthetic and natural forms. Synthetic oils make up a slightly larger share of the market, as they tend to work better, which makes them more popular overall. Their improved resistance to heat, cold, shear, and oxidation has led many manufacturers to discontinue organic-based compounds.

API Two-Cycle Motor Oil Specifications

• TA (Obsolete) Proposed classification for two-stroke engine oils required for extremely small engines, typically below 50 cc. Engine tests for this classification were in preparation when the coordinating European Council (CEC) withdrew support for this category.
• TB (Obsolete) Proposed classification for two-stroke engine oils required for scooter engines and other heavy-duty small engines, typically between 50 and 200 cc The test sponsor no longer needs this category and the classification has been withdrawn.
• TC (Current) Designed for various high-performance engines, typically between 200 and 500 cc, such as motorcycles and snowmobiles and chainsaws with high fuel oil content – but not for outboard engines. Two-stroke engine oils developed for API classification TC address problems with ring closure, pre-ignition, and cylinder wear.
• TD (Obsolete) Developed for water-cooled outboard engines, this classification uses the identical engine test as the one in the TC-W category of the National Marine Manufacturers Association (NMMA). API TD has been replaced and is no longer accepted by the NMMA, which now recommends oils that meet TC-W3 requirements for water-cooled outboard engines.

There are two methods for feeding

In most cases, the ratio between gasoline and 2-stroke engine oil is mixed by hand and added to the tank as a finished mixture. The classical method has the advantage that only one tank is necessary. The use of two separate tanks is less common. But if it is the case, the two liquids are filled in accordingly and after the engine is started, the oil is added to the gasoline by a pump. An advantage of this procedure is that the ratio of the mixture can be dosed.

The three different types

2-stroke engine oil is divided into three types. Number one is the fully synthetic oil, which is produced from synthetic base oils. Alternatively, a chemical process can also be used. In technical terminology, it is also referred to as “high-alloy oil”.

The semi-synthetic 2-stroke engine oil is a mixture consisting of mineral and synthetic base oils. The lubricating performance or the general properties are improved by additives. The oil is designed for normal loads.

Number three is the mineral 2-stroke oil. It does not contain any additives and is obtained exclusively from pure crude oil. Compared to the other two types, it has some disadvantages and cannot meet many requirements of today’s engines. For this reason it is rarely found.