So why new LED taillights? Well, if you are looking for a serious upgrade for any type of automotive lighting, you’ll want to switch to LEDs. With some of the many cheap products on the market, you may have difficulty identifying exactly what is best for you. Instead of crawling through dozens of products, we have searched for you and returned with the right LED taillights for you.
Below are our reviews of the 6 best LED taillights on the market:
LUYED 2 X 900 Lumens Super Bright LED Tail Light Bulbs
Buy LUYED 2 X 900 Lumens Super Bright LED Tail Light Bulbs
LUYED has these fantastic 450 lumens per lamp, specially designed for a variety of different lights. They are also virtually universal, but check your car’s owner’s manual before you make the investment to make sure they fit properly (just use Amazon’s reliable inspector at the top of the product page).
Unfortunately, they can be a bit difficult to install, but if you opt for a professional installation, you can take them to a certified store near your home. They are inexpensive, versatile and ultra-bright, making them a winner for those who can afford the installation or manage it themselves.
LUYED 2 x 600Lumens Super Bright LED Tail Light Bulbs
Buy LUYED 2 x 600Lumens Super Bright LED Tail Light Bulbs
Also from LUYED these 300 lumen lights are bright enough to put your OEM devices in the shade without destroying your power grid. They are not quite as bright as some of the options on the market, but they fit another variety of fixtures.
Like most LED taillights, you will probably want to start with a professional installation unless you are truly at the cutting edge of technology with your automotive electronics skills. They are also dirt cheap, and a good way to ensure that your taillights are visible for a long distance. These are among the best LED taillights for the money.
JDM ASTAR 1200 Lumens 144-EX Chipsets LED Tail Light Bulbs
Buy JDM ASTAR 1200 Lumens 144-EX Chipsets LED Tail Light Bulbs
Originating from JDM ASTAR, these 600 lumens per light are among the brightest on the market. If you are looking for the ultimate in brightness then you will want to take a close look at these, but you may want to hold off if you are mainly driving into town. 1200 lumens are actually ultra-bright.
However, they fit into a variety of different devices and are really among the brightest on the market. This makes them the ultimate choice for visibility, but those behind you may not be too grateful.
ENDPAGE 7443 7440 992 T20 LED Tail Light Bulb 2-pack
Buy ENDPAGE 7443 7440 992 T20 LED Tail Light Bulb 2-pack
With a radius of 360° and a brightness equivalence of 300% of most series lighting, these ENDPAGE light bulbs are suitable for almost everyone. They also have a dual function so that they can be used in low light conditions for taillights and bright brake lights.
With an advanced heat sink and plug-and-play functionality, they are also easy to install. They also have a one-year return policy. Just remember that if you are planning to use them for your turn signals, you will probably need a professional installation as they need a 50W 6-ohm resistor to blink properly. With this note in mind, however, these remain among the best LED taillights.
JDM ASTAR Extremely Bright 2000 Lumens LED Bulbs for Backup
Buy JDM ASTAR Extremely Bright 2000 Lumens LED Bulbs for Backup Reverse Lights
The JDM ASTAR 2000 Lumen reversing lights are excellent complements for any vehicle that needs more pronounced, perceptible reversing lights.
These 1.8″ long LED bulbs deliver an incredible 2000 lumens – 1000 lumens for each bulb – to ensure that everyone can see the lights of your vehicle from an incredible distance. The bulbs themselves are 360-degree, so they can be seen from any angle, and each bulb comes with a high quality, powerful 90-piece chipset for maximum performance. To install, simply check that they work in your vehicle and plug them in!
These light bulbs give you some of the brightest results of LED lights in a vehicle. They are excellent when you need to drive for work at night, and they are almost impossible to overlook if your vehicle is somewhere in sight of someone. On the other hand, these lights could be almost too bright for a normal car, so it is important to consider the other lights on your vehicle before you buy powerful light bulbs like those from JDM ASTAR.
iBrightstar Newest 9-30V Super Bright Low Power Dual Brightness 3156 3157 3056 3057 LED Bulbs with Projector Replacement for Tail Brake Lights, Brilliant Red
Buy iBrightstar Newest 9-30V Super Bright Low Power Dual Brightness 3156 3157 3056 3057 LED Bulbs with Projector Replacement for Tail Brake Lights, Brilliant Red
With an advanced heat sink and plug-and-play functionality, they are also easy to install. A load resistor or flasher relay may be required to prevent hyper flash when replacing flashing lights.
Just remember that if you plan to use them for your turn signals, you will probably need a professional installation. These light bulbs are 300% brighter than the original halogen lamp, full aluminum housing with projection lens for maximum light output and better heat distribution, built-in constant current IC for longer life and low power consumption.
Why LED taillights?
Although it is cheaper and usually easier to install halogen or incandescent lamps, many people never, look back after switching to LEDs. In general, the same applies to all automotive lighting: LEDs are usually better when you get used to the different color spectrum.
Of course, coloring is usually not a problem when you replace your taillights.
When you upgrade, you can expect the following:
- Lower power consumption per lumen
- Significantly higher light output
- Faster reaction time for brake and rear lights
- A lifetime your vehicle is likely to endure.
The last is above all a good selling point: LED light bulbs and lights can be more expensive, but they will also be much cheaper in the long run, as the lifetime of these types of lights is usually measured in tens of thousands of hours.
Selection of the right LED taillights
Of course, it is not always easy to retrofit a car without LEDs directly from the factory. Instead, you need to make sure that the LED bulbs you want to use fit, and then find out if they are plug and play or if you end up paying a professional.
It is usually pretty easy to find out if a light bulb fits in your vehicle. Google “Taillights [make/model/year]” and then see if the lights you are looking at list your light bulb under their sockets.
From there you only have to make sure that you have the desired brightness level. While it is rarely a problem with headlights, LEDs become powerful and even with the red screen above them, it can be a bit much for those behind you.
The brightness of LEDs is measured in lumens, as opposed to watts, because the lights are so much more energy efficient. Anything over 1200 lumens probably expresses it when it comes to your taillights, but if you are on frequent off-road adventures or driving in bad weather, you will find they still have a purpose.
Plug-and-play models are harder to get for taillights than for the front lights of your vehicle. It is just the way they are wired and the differences in performance.
A more advanced chipset usually means one thing for the end user: longer life. Super low cost LEDs can have chipsets that malfunction and overheat luminaires, greatly reducing their predicted life.
Finding the best LED taillights you can find is a cost effective way to improve the safety and visibility of your car. With so many different models on the market, there is really something for everyone that makes for a very customizable and user-friendly experience once you have figured out exactly what you are looking for. Good luck!