When choosing an engine oil for your Nissan, we recommend using an engine oil that has the specification API SN/SP, ILSAC GF-6.
Best Synthetic Engine Oil 0W-20 for Nissan
The most popular with Nissan owners was motor oil with a viscosity of 0W-20, 5W-30 and 5W-40
Best motor oil for Nissan
1. Genuine Nissan Synthetic Motor Oil 0W-20
2. ZEPRO Eco Medalist Advanced Moly Engine Oil 0W-20
3. Castrol EDGE Advanced Full Synthetic Motor Oil 0W-20
4. Castrol GTX MAGNATEC Full Synthetic Motor Oil 0W-20
5. Pennzoil Platinum Full Synthetic Motor Oil 0W-20
6. Castrol GTX MAGNATEC Full Synthetic Motor Oil 5W-20
7. Milesyn Full Synthetic Motor Oil SXR API GF-5/SN Plus 5W20
8. Eneos Fully Synthetic Motor Oil 0W-20
9. Mag 1 Full Synthetic Motor Oil 5w-20
10. RAVENOL Motor Oil SFE SAE 5W-20
11. Quaker State Advanced Durability Motor Oil 5W-20
12. Genuine Nissan Conventional Motor Oil 5W-30
13. Motul 8100 Eco-Lite Motor Oil SAE 5W-30
14. Idemitsu Full Synthetic Engine Oil 5W-30
15. Formula Shell Motor Oil 5W-30
16. Pennzoil Motor Oil 5W-30
17. ZEPRO Euro Formula Engine Oil 5W-40
18. Formula Shell Motor Oil 10W-30
19. Valvoline Advanced Full Synthetic Motor Oil SAE 10W-30
Engine oil for Nissan
Top rated oil for Nissan
Best rated oil for Nissan
The engine oil is responsible for keeping your Nissan’s engine running smoothly by lubricating the engine parts and reducing friction.
Best engine oil for Nissan
ILSAC GF-5 oils are formulated to improve fuel efficiency and provide improved performance across a wide range of areas including high temperature deposit protection for pistons, improved protection against the formation of engine sludge Nissan.
Best motor oils meets the most advanced GF-5 standard, set by the International Lubricants Standardization and Approval Committee (ILSAC) enable to exceed the requirements of such car manufacturers as Nissan.
1. Genuine Nissan Synthetic Motor Oil 0W-20
Buy Genuine Nissan Synthetic Motor Oil 0W-20
Performance and safety are built into every genuine Nissan part. Each component is optimally designed and rigorously tested in Nissan’s research and development facilities.
Nissan Motor Oil 0W-20 SN
Most Nissan models from 2013 onwards are filled with original Nissan 0W-20 engine oil ex works. This high performance lubricant has been developed and formulated specifically for the performance of the vehicle. The use of 0W-20 engine oil is one of the factors that contribute to improved fuel economy in newer Nissan models. The exclusive blend of genuine Nissan oil is only available from your Nissan dealer and is covered by warranty.
Pros:
- Original Nissan synthetic 0W-20 engine oil
- Suitable for all makes and models that require 0W-20 engine oil.
- Meets the requirements of ILSAC GF-5 API, SN, SM, SL, SM, SL.
- Manufactured by ExxonMobil Oil Corporation
Cons:
- None
2. ZEPRO Eco Medalist Advanced Moly Engine Oil 0W-20
Buy ZEPRO Eco Medalist Advanced Moly Engine Oil 0W-20
This oil is great to ensure that your vehicle engine is protected. It is equipped with stop-start technology and is therefore great when you are working in conditions that are severe in a city. It has an advanced formulation of molybdenum that reduces friction in the engine and maximizes engine performance and efficiency.
Its superiority is due to its chemistry, which ensures that it gives you a more balanced performance for your engine while increasing engine life. Advanced power and friction modifiers included in this product ensure that the product has extremely low friction. It is available in both 1 and 5-quarter containers.
Pros:
- Its chemistry provides a balanced performance
- Better efficiency of the engine, which extends its life
- Manufactured by a renowned company
- Made in the USA
- The stop-start technology is good for those who work under difficult driving conditions in the city.
Cons:
- It is expensive.
3. Castrol EDGE Advanced Full Synthetic Motor Oil 0W-20
Buy Castrol EDGE Advanced Full Synthetic Motor Oil 0W-20
It is a full synthetic oil, which is considered to be of high quality and one of the most reliable products we have tested. You get more confidence if you know that it is produced by a renowned company – Castrol. Due to the fact that it is full synthetic, it offers great mileage and high performance.
When it comes to overall performance, this oil will not disappoint you. Its formulation surpasses the performance of other oils. In fact, its advanced formula will put a lot of pressure on your engine, which is important for maximum fuel efficiency and power output. You do not need to worry about your engine and other parts of the engine wearing out faster because this oil provides total protection.
Its high lubricity ensures smooth movement. The metals do not slide, but glide smoothly, which in turn prevents the engine parts from tearing.
Apart from lubrication, the oil is generally very effective in keeping the engine clean. Engine wear is minimal, which means that there are only small deposits. In addition, because the oil maintains an ideal viscosity, it contributes to keeping the engine clean. An oil is highly recommended by vehicle manufacture
Pros:
- It can withstand high pressure
- It comes at a great price.
- It keeps the engine clean.
- Lubricates the engine
- It uses titanium technology patented Castrol
Cons:
- Not the best oil for a cold engine start
4. Castrol GTX MAGNATEC Full Synthetic Motor Oil 0W-20
Buy Castrol GTX MAGNATEC Full Synthetic Motor Oil 0W-20
Another well-known full synthetic engine oil is Castrol 03060 GTX MAGNATEC 0W-20 full synthetic engine oil. This product is supplied in a standard 5-liter jug and is reasonably priced. As a full synthetic engine oil, it has increased engine performance, improved oil life and eliminates engine deposits. It is also very fuel-efficient.
In addition, Castrol GTX MAGNATEC minimizes engine wear by coating important engine parts even in cold weather. Castrol’s proprietary formula contains molecules specifically designed to adhere to engine parts in all weather conditions and regardless of temperature, even when the vehicle’s engine is not running.
This synthetic engine oil also ensures constant lubrication of the entire engine block of your vehicle and improves engine life. Castrol claims that it can make engine components 4 times smoother than their extensive testing indicates. In addition, the price is a big advantage compared to other brands.
Pros:
- High fuel efficiency based on US industry standards
- Unique full synthetic technology to combat harmful sludge accumulation
- Unsurpassed protection for critical engine components
- Critical engine components left behind four times smoother
- Dramatically reduces engine wear
Cons:
- According to verified consumers, it has not always maintained its 0W flowability as claimed, and it actually tends to thicken at colder temperatures.
5. Pennzoil Platinum Full Synthetic Motor Oil 0W-20
Buy Pennzoil Platinum Full Synthetic Motor Oil 0W-20
If you decide to take home this special motor oil to use in your car, it is best to know that it will keep your engine safe in any case. It eliminates engine wear and tear and ensures that you get your original engine.
Instead of the metals of the engine grinding each other, it creates a sliding layer and thus eliminates friction. Performance is improved by its purely synthetic formulation. Contrary to what petroleum oil does, this oil cleans the engine and removes engine sludge.
Its high ability to ensure that it maintains viscosity makes it better than other oils. The good news is that it is not affected by extreme conditions, so it can be classified as one of the 0W-20 synthetic engine oils currently on the market.
Its canister is very ergonomic, making it easy to lift. The canister has double handles, making it easy to hold. It is a proven synthetic oil from Pennzoil.
Pros:
- Cleans piston
- It is pure synthetic oil
- The box is ergonomic
- Faster low temperature oil flow
- Protects against wear
- Made in the USA
Cons:
- Less mileage than the competitors
6. Castrol GTX MAGNATEC Full Synthetic Motor Oil 5W-20
Buy Castrol GTX MAGNATEC Full Synthetic Motor Oil 5W-20
You probably already know that Castrol is an excellent brand of leading high-performance synthetic engine oil. If you still do not believe it, you can try Castrol 03063 GYX MAGNATEC 5W-20 engine oil. This oil is specially formulated to protect your engine by minimizing wear and leaving key components 4 times smoother.
Castrol 03063 GTX MAGNATEC 5W-20 Full Synthetic Motor Oil is Castrol’s most powerful oil and an ideal option for those who want the best for their vehicle.
This version of Castrol GTX MAGNATEC is also a high quality full synthetic 5W-20 which offers excellent wear protection. If your car has more than 75,000 miles on the odometer, this engine oil can help protect your emission system while extending the life of your car engine.
In addition, Castrol 03063’s ultraclean 5W-20 Double Action formula is designed to remove old sludge while preventing new sludge deposits. Even if the oil drains, this version of Castrol GTX MAGNATEC will stick to the engine components.
Finally, it adds a protective layer during the engine warm-up phase. In addition, with these unique features, it is quite expensive, but it is available in a reasonable price range, which also makes it one of the best quality engine oils you can find today.
Pros:
- Equipped with intelligent molecules
- Keeps important engine components up to 4 times smoother
- High fuel efficiency
- Unique fully synthetic technology to combat harmful sludge accumulation
- Unsurpassed protection against viscosity degradation
- Superior wear protection on key engine components
Cons:
- None
7. Milesyn Full Synthetic Motor Oil SXR API GF-5/SN Plus 5W20
Buy Milesyn Full Synthetic Motor Oil SXR API GF-5/SN Plus 5W20
Milesyn SXR 5W20 API GF-5 Plus/SN, full synthetic engine oil, has been specially formulated with synthetic base oils and high performance additive packages to provide superior performance advantages over conventional engine oils. Milesyn SXR 5W20 API GF-5 Plus/SN, Full Synthetic Motor Oil is specially formulated for General Motors and licensed by General Motors to meet the new global engine oil specification. This oil meets or exceeds the latest API SN and ILSAC GF-5 specifications and all previous service classifications API SM, SL and ILSAC GF-4 and GF-3.
This oil is designed for excellent oxidation stability, excellent low temperature properties for protection during cold starts, lower volatility for reduced oil consumption and excellent resistance to viscosity degradation.
Milesyn SXR 5W20 meets the most demanding lubrication requirements of today’s naturally aspirated, turbocharged and supercharged gasoline and flex fuel engines.
Pros:
- Excellent oxidation stability, outstanding low-temperature properties for protection during cold starts
- Lower volatility for lower oil consumption
- Excellent resistance to viscosity degradation
Cons:
- Difficult to find in the stores
8. Eneos Fully Synthetic Motor Oil 0W-20
Buy Eneos Fully Synthetic Motor Oil 0W-20
The ENEOS 0W-20 high-performance full synthetic engine oil with the new ILSAC GF-5 specification is an improvement in engine oil performance compared to the current GF-4 specification. The ENEOS GF-5 oil offers better fuel economy, longer durability of the emission system, improved piston cleanliness, less engine sludge and improved turbocharger protection.
Pros:
- Mixture of hydro refined high-performance base oils and an optimized additive mixture
- Offers significantly better heat and oxidation stability than conventional motor oils, mixed from solvent-refined base oils
- Thanks to its innovative formulation, Eneos 0w-20 achieves a low viscosity of 0W-20, thus enabling excellent fuel and environmental compatibility
Cons:
- Difficult to find in the store
9. Mag 1 Full Synthetic Motor Oil 5w-20
Buy Mag 1 Full Synthetic Motor Oil 5w-20
This oil is a full synthetic oil, i.e. no crude oil is used in its production. Synthetic oil can be used in vehicle engines instead of engine oils refined from crude oil and often offers better mechanical performance than conventional engine oil, including higher gas mileage and less engine wear at extreme temperatures. Due to its complex manufacturing method, it can often cost more than conventional engine oil.
MAG 1 Full synthetic 5W-20 engine oil is our purest and most advanced formulation. It offers unsurpassed protection and performance.
MAG 1 with FMX technology offers unsurpassed protection in any viscosity. Even our lowest viscosity oils protect better than thick oils of the past. Our advanced oil chemistry improves oil properties over time, while maintaining the benefits of viscosity, friction and wear protection despite high engine temperatures.
Pros:
- Formulated with fmx friction modifiers to reduce engine wear by 56 percent compared to standard ILSAC gf-4/SN engine oils
- Formulated with high phosphate retention 2Dp for extended wear performance
- Leading OEM viscosity class for economical fuel consumption
- Excellent resistance to cold start wear
- Complies with API SN and ILSAC GF-5
Cons:
- None
10. RAVENOL Motor Oil SFE SAE 5W-20
Buy RAVENOL Motor Oil SFE SAE 5W-20
RAVENOL Super Fuel Economy SFE SAE 5W-20 is a universally applicable fuel economy engine oil, a top product for modern passenger cars with the latest generation of petrol and diesel engines.
Due to the USVO technology an extremely high viscosity stability is achieved. This improves engine protection, performance, engine cleanliness and oil change intervals. The USVO technology allows the product to have no shear losses during the entire change interval and is extremely stable against oxidation. This unique technology lubricates the oil faster, minimizing friction and keeping the engine clean and efficient.
RAVENOL Super Fuel Economy SFE SAE 5W-20 uses the positive properties of tungsten to smooth the surface structure of the engine, reduce friction, wear, and significantly improve mechanical efficiency.
Pros:
- High quality synthetic engine oil developed and extensively tested for American, European and Japanese engines when SAE 5W-20 is required
- Licensed approvals for the API SN, SM and ILSAC GF-5 quality standards
- Great corrosion protection even at high speeds, protects the longevity of the motor with excellent cleaning and dispersing properties for trouble-free operation of the motor
- Low evaporation tendency with low oil consumption and security against sludge deposition, coking and corrosion even under unfavorable operating conditions
Cons:
- None
11. Quaker State Advanced Durability Motor Oil 5W-20
Buy Quaker State Advanced Durability Motor Oil 5W-20
Quaker State Advanced Durability Conventional engine oil provides protection against wear and failure caused by engine load. Minimizes friction-related wear to keep your engine performance at peak levels. Meets or exceeds standards for protection in high temperatures and severe operating conditions. Meets or exceeds the requirements of ILSAC GF-5, API SN and previous API standards, GM 6094M, Ford WSS-M2C930-A and Chrysler MS-6395
Independent laboratory tests show that Quaker State Advanced Durability exceeds the industry standard for wear protection three times over. The used oil (standard oil drain, for the vehicle), also passes the industry standard. Wear is one of the biggest enemies your engine is exposed to. It can reduce engine life and rob you of performance. That is why Advanced Durability Motor Oils are designed to reduce wear and protect against high temperatures and harsh operation.
Pros:
- Protects against corrosion and contains acid-neutralizing additives that prevent combustion acids from corroding your engine.
- Meets or exceeds the North American warranty requirements of the world’s automakers, including European, Japanese and US
- Ensures a constant viscosity during the entire oil drain period
- Advanced Durability Motor Oil is formulated to meet the fuel economy requirements of the GF-5 industry standard.
Cons:
- None
12. Genuine Nissan Conventional Motor Oil 5W-30
Buy Genuine Nissan Conventional Motor Oil 5W-30
The engine oil was specially developed for the car brands Nissan and Infinity, which determines the design characteristics of the moving parts of the engine and the mode of operation. Thanks to a quality set of detergents, anti-corrosion and dispersing additives, the oil helps to prevent the engine from overheating and contamination with combustion products.
The viscosity of Nissan / Infiniti 5B-30 oil is available in the temperature range of -30°C to +20°C.
Pros:
- Original Nissan Conventional 5W-30 engine oil
- Suitable for all makes and models that require 5W-30 engine oil.
- Meets the requirements of ILSAC GF-5 API, SN, SM, SL, SM, requirements.
- Manufactured by ExxonMobil Oil Corporation
Cons:
- None
13. Motul 8100 Eco-Lite Motor Oil SAE 5W-30
Buy Motul 8100 Eco-Lite Motor Oil SAE 5W-30
100% synthetic motor oil with energy-saving properties. Specially designed for modern high-performance gasoline engines in passenger cars, including turbocharged and direct injection, where the use of oils with reduced friction and very low (≥ 2.9 mPa.s) HTHS viscosity (viscosity at high temperatures and high shear rates). Designed for modern engines requiring oils with viscosity grade 30 and energy saving properties (API SN class compliance) Applicable in vehicles equipped with exhaust gas neutralization systems. Some engines are not designed to use this type of oil, so before using this product, please read the vehicle manual.
Pros:
- The new SN API standard is fully backward compatible with previous SM API requirements and below. SM API provides exceptional resistance to oxidation, high sedimentation prevention properties and engine cleaning.
- High anti-wear properties and high oil flowability at low temperatures throughout the life of the oil.
- MOTUL 8100 Eco-lite 5W-30 provides high lubricating, anti-wear properties and high thermal oxidation stability, which reduces oil carbon monoxide.
- Good oil pumping at startup allows the engine to quickly reach the required system pressure and reach the required speed and temperature.
- This oil saves fuel and therefore minimizes greenhouse gas emissions. – The SAE 5w30 viscosity grade is fully adapted for use in modern petrol engines.
Cons:
- Not a long shelf life
14. Idemitsu Full Synthetic Engine Oil 5W-30
Buy Idemitsu Full Synthetic Engine Oil 5W-30
The container contains 5 quarts. In addition to 5w-20, it offers the engine an amazing protection against wear. With its high piston cleanliness, the green gas emissions are reduced. This protects the exhaust gas cleaning systems and eliminates fuel consumption. It minimizes the formation of deposits, even under complicated conditions.
It includes turbos and is designed for high-performance engines. With the specific technology, the engine will serve for a long time.
It is compatible with API SM, SL, SJ, SH it is recommended for all vehicles using API SN/ILSAC GF-5 Performance engine oil. So check the manual of your car to make sure you buy the right oil for it.
Pros:
- Eliminated gas emissions
- Reduced fuel consumption
- Durable engine service
- Long service life
Cons:
- It is rather expensive.
15. Formula Shell Motor Oil 5W-30
Buy Formula Shell Motor Oil 5W-30
Formula Shell 5W-30 Conventional engine oil meets or exceeds the North American warranty requirements for U.S., European and Japanese passenger cars and light trucks with gasoline and gasoline turbocharged engines, where API SN with resource-saving, SN, SM, SL, SJ etc. Conventional engine oil is compatible with other conventional and synthetic oils.
Pros:
- Protection for extremely high temperatures
- Protection against harmful deposits and acids, which contributes to clean and durable engine running
- Can be used at any time in the life cycle of an engine and is fully compatible with conventional engine oils.
- Conventional engine oil is formulated for improved fuel economy
- Provides the motor protection and power required by modern motors
Cons:
- Difficult to find in the store
16. Pennzoil Motor Oil 5W-30
Buy Pennzoil Motor Oil 5W-30
Pennzoil Motor Oil, America’s most trusted motor oil, is an advanced, proprietary, conventional formula with active detergents designed to clean the sludge in your engine. It provides a balance between reducing frictional losses and protecting against harmful engine wear by getting between moving parts and preventing them from touching. It exceeds the stringent engine protection standards of ILSAC GF-5 and API SN and is specifically designed to protect against the harmful effects of stop-and-go driving and LSPI (Low-Speed Pre-Timition) in modern turbocharged engines.
Pros:
- Contains active cleaning technology that helps remove less engine oil from the sludge
- No leading conventional oil offers better wear protection by preventing metal-to-metal contact
- Helps protect against the effects of low speed pre-ignition (LSPI) in modern supercharged engines
- Contains a proprietary formulation that reduces friction between moving motor parts
Cons:
- None
17. ZEPRO Euro Formula Engine Oil 5W-40
Buy ZEPRO Euro Formula Engine Oil 5W-40
ZEPRO Euro Formula is a premium synthetic engine oil, which has been specially optimized for European high performance engine technologies. A robust and perfectly balanced combination of advanced additive components provides excellent protection while allowing maximum performance. ZEPRO Euro Formula 5W-40 is the perfect solution for drivers who want to keep their engines in “as new” condition even after many kilometers of hard driving.
ZEPRO’s Euro Formula engine oil significantly exceeds the standard performance characteristics of most engine oils formulated for the North American market and claiming API SN and ILSAC GF-5 performance. It meets or exceeds the very demanding requirements of the most prestigious European brands, such as BMW, Mercedes-Benz, Audi and Porsche, among others. Specific applications include naturally aspirated and turbocharged gasoline engines as well as naturally aspirated diesel and high-speed turbo diesel (TDI) engines (not equipped with diesel particulate filter or DPF).
Pros:
- Provides additional protection for engines running on biofuels, including E85 and up to 20% biofuel biodiesel.
- Turbo formula: Fully synthetic base oils, enriched with advanced antioxidant and inhibitor-additive chemistry, provide improved turbocharger performance and durability
- The specially developed formulation resists the formation of harmful carbon and paint deposits at extreme temperatures.
- Advanced wear protection technology combines surface active additive chemistry with high molecular weight lubricant film enhancers to extend engine life and durability
Cons:
- Difficult to find in the store
18. Formula Shell Motor Oil 10W-30
Buy Formula Shell Motor Oil 10W-30
Formula Shell 10W-30 Conventional engine oil meets or exceeds the North American warranty requirements for U.S., European and Japanese passenger cars and light trucks with gasoline and gasoline turbocharged engines, where API SN with resource-saving, SN, SM, SL, SJ etc. Conventional engine oil is compatible with other conventional and synthetic oils.
Clean engine oil formula offers economic value and performance in a trusted brand. The additive package helps protect the emission system and has excellent sludge and deposit control. The application is for gasoline-powered vehicles that require an ILSAC/API oil (fulfilled specifications vary depending on viscosity grade, see product label for more information)
Pros:
- Protection for extremely high temperatures
- Protection against harmful deposits and acids, which contributes to clean and durable engine running
- Can be used at any time in the life cycle of an engine and is fully compatible with conventional engine oils.
- Conventional engine oil is formulated for improved fuel economy
- Provides the motor protection and power required by modern motors
Cons:
- None
19. Valvoline Advanced Full Synthetic Motor Oil SAE 10W-30
Buy Valvoline Advanced Full Synthetic Motor Oil SAE 10W-30
Valvoline SynPower full synthetic engine oil provides superior engine protection by combating the three main causes of engine stress: heat, deposits and wear. That is because SynPower is the only leading full synthetic oil formulated with more durable anti-wear additives that stay in the oil longer. When you want your engine to run at its best, choose the ultimate protection you will find with Valvoline SynPower full synthetic.
Pros:
- Meets or exceeds: API SN, API SN with SN PLUS, resource-saving, ILSAC GF-5, as well as all previous API and ILSAC petrol categories. Refer to API Service and Viscosity Recommendations manual.
- Excellent engine cleanliness due to outstanding sludge and paint protection
- Excellent high temperature protection under tough driving conditions
- Superior cold protection due to faster oil flow at start
- Is fully compatible with all conventional and leading synthetic engine oils
Cons:
- The bottle may be leaking
Nissan recommended oil brand
There are two main types of engine oils used in Nissan vehicles: conventional and synthetic oils.
You have to know the difference between these types of oils. To decide which oil is right for your car. Conventional motor oil is extracted from crude oil from the bowels of the earth and processed in a refinery. Synthetic motor oil is an artificially created lubricant made from petroleum. The process of refining and distillation of synthetic motor oil ensures that there are no unnecessary contaminants.
Nissan Oil
Despite the fact that the Nissan car’s manual may indicate the use of synthetic oil. And the car may accept conventional engine oil. But the use of synthetic oil is acceptable. There is a full range of synthetic engine oils for Nissan vehicles, and different specific oils are recommended for different engines. There are also some very good reasons why you may want to switch to synthetic oil in your car if you haven’t already.
Probably the biggest advantage of synthetic oil is that it maintains viscosity much better than conventional oil under extremely hot and extremely cold conditions. Conventional oils can become too thin at very high temperatures and too thick in frost. Synthetic oils are more stable under extreme temperatures, which allows more consistent and correct lubrication of engine parts under all conditions and keeps friction low.
What kind of oil does a Nissan take?
Synthetic engine oil is able to reach all moving parts of an engine faster than conventional oil when starting. The time these parts remain improperly lubricated directly contributes to the friction between them. Over time, more friction leads to more engine wear, increases maintenance costs, and shortens engine life.
The reason why synthetic and conventional oils behave differently lies in their different molecular consistency. Synthetic oil consists of molecules that have a uniform shape and mass. When these uniform molecules collide, they generate less friction and therefore less heat. Because it is not so pure, the molecules that make up conventional oil do not have such constant shapes. The smaller, shorter molecules are particularly problematic because they burn when they get hot.
Nissan ester oil
What oil does Nissan use from factory?
Following the factory recommended oil and filter change schedule for your Nissan is important for maintaining vehicle performance.
Genuine Nissan engine oil
CONVENTIONAL MOTOR OIL
- Helps reduce engine wear and corrosion under most operating conditions
- Helps control thermal breakdown and deposit formation
- Meets or exceeds the latest industry specification GF-5/API SN for ILSAC viscosity classes
Mobil Super™ Synthetic
FULL SYNTHETIC ENGINE OIL
- Protects against sludge, engine rust and corrosion
- Designed to extend the life of engines in vehicles of all ages
- Outperforms conventional engine oils
Mobil 1™
ADVANCED FULL SYNTHETIC ENGINE OIL
- Advanced full synthetic formula keeps your engine like new
- Provides excellent overall performance to extend engine life
- Many of the world’s leading car manufacturers choose Mobil 1, including Nissan GT-R, for factory filling.
Genuine Nissan Engine Oil
FULL SYNTHETIC ENGINE OIL
- Excellent wear protection against sludge, engine rust and corrosion
- Designed to extend the life of engines in vehicles of all ages.
- Excellent protection against high temperatures to keep the engine cool.
- Outperforms conventional engine oils.
Mobil 1 Advanced fuel economy
ADVANCED FULL SYNTHETIC ENGINE OIL
- Advanced full synthetic formula keeps your engine like new
- Provides excellent overall performance to extend engine life
- Many of the world’s leading car manufacturers choose Mobil 1, including Nissan GT-R, for factory filling.
Nissan Rogue oil change price
The average cost of an oil change at Nissan Rogue is between $111 and $141, labor costs are estimated at between $44 and $56, while parts cost between $67 and $85.
Engine oil for Nissan Juke
The recommended engine oil for the Nissan Juke is a 5W-30.
Engine oil for Nissan Altima
The recommended engine oil for the Nissan Altima is a 0W-20.
Engine oil for Nissan Rogue
The recommended engine oil for the Nissan Rogue is a 0W-20.
Engine oil for Nissan Murano
The recommended engine oil for the Chevrolet Suburban is a 5W-30.
Engine oil for Nissan Versa
The recommended engine oil for the Nissan Versa is a 5W-30.
Engine oil for Nissan Pathfinder
The recommended engine oil for the Nissan Pathfinder is a 5W-40.
Engine oil for Nissan Micra
The recommended engine oil for the Nissan Micra is a 5W-30.
Engine oil for Nissan Note
The recommended engine oil for the Nissan Note is a 5W-30.
Engine oil for Nissan Sentra
The recommended engine oil for the Nissan Sentra is a 0W-20.
Engine oil for Nissan Qashqai
The recommended engine oil for the Nissan Qashqai is a 5W-30.
Engine oil for Nissan Navara
The recommended engine oil for the Nissan Navara is a 5W-40.
Nissan Versa engine oil capacity (USA)
Model: Nissan Versa, C11 (2007 – 2011) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Versa 1.6 (2009 – 2011) | HR16DE | 3 l 3.17 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Versa 1.8 (2007 – 2008) | MR18DE | 3.9 l 4.12 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Versa 1.8 (2009 – 2011) | MR18DE | 4.1 l 4.33 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Advertisements |
Model: Nissan Versa, C12 (2011 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Versa 1.6 (2011 – 2013) | HR16DE | 3 l 3.17 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Versa 1.6 (2013 – 2013 ) | HR16DE | 3 l 3.17 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles / 6 months |
Versa 1.8 (2011 – 2012) | MR18DE | 4.1 l 4.33 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Versa 1.6 (2014 – 2015) | HR16DE | 3.5 l 3.7 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Versa 1.6 (2015 – ) | HR16DE | 3.5 l 3.7 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Model: Nissan Versa Note, E12 (2012 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Versa Note 1.6 (2012 – 2013) | HR16DE | 3.5 l 3.7 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Versa Note 1.6 (2014 – ) | HR16DE | 3.5 l 3.7 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Nissan Maxima engine oil capacity (USA)
Model: Nissan Maxima, A34 (2004 – 2008) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Maxima 3.5 (2004 – 2004) | VQ35DE | 4 l 4.23 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Maxima 3.5 (2005 – 2006) | VQ35DE | 4.2 l 4.44 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Maxima 3.5 (2007 – 2007) | VQ35DE | 4.2 l 4.44 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Maxima 3.5 (2008 – 2008) | VQ35DE | 4.2 l 4.44 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Model: Nissan Maxima, A35 (2009 – 2014) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Maxima 3.5 (2009 – 2009) | VQ35DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Maxima 3.5 (2010 – 2012) | VQ35DE | 4.6 – 4,8 l 4.86 – 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Maxima 3.5 (2012 – 2014) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Model: Nissan Maxima, A35 MEXICO (2009 – 2014) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Maxima 3.5 (Mexico) (2009 – 2009) | VQ35DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Maxima 3.5 (Mexico) (2010 – 2014) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Model: Nissan Maxima, A36 (2015 – )
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Maxima 3.5 (2015 – ) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles/ 6 months |
Nissan Juke engine oil capacity (USA)
Model: Nissan Juke, F15 (2011 – )(USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Juke 1.6 DIG-T (2011 – 2012) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Juke 1.6 DIG-T 4WD (2011 – 2012) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Juke 1.6 DIG-T (2012 – 2014) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Advertisements | |||
Juke 1.6 DIG-T 4WD (2012 – 2014) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Juke 1.6 DIG-T (2015 – ) | MR16DDT | 4.3 l 4.54 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles/ 6 months |
Juke 1.6 DIG-T NISMO 4WD (2013 – 2014) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Juke 1.6 DIG-T 4WD (2015 – ) | MR16DDT | 4.3 l 4.54 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles/ 6 months |
Juke 1.6 DIG-T NISMO (2013 – 2014) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles/ 6 months |
Juke 1.6 DIG-T NISMO RS (2015 – ) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles/ 6 months |
Juke 1.6 DIG-T NISMO RS 4WD (2015 – ) | MR16DDT | 4.5 l 4.76 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles/ 6 months |
Nissan X-Trail engine oil capacity (USA)
Model: Nissan X-Trail, T30 (2005 – 2007) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
X-Trail 2.5 (2005 – 2007) | QR25DE | 3.9 – 4.1 l 4.12 – 4.33 US Quarts / Filter: 0.4 l 0.42 US Quarts | 7 500 miles / 6 months |
X-Trail 2.5 AWD (2005 – 2007) | QR25DE | 3.9 – 4.1 l 4.12 – 4.33 US Quarts / Filter: 0.4 l 0.42 US Quarts | 7 500 miles / 6 months |
Nissan Rogue engine oil capacity (USA)
Model: Nissan Rogue, T31 (2008 – 2014) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Rogue 2.5 (2008 – 2008) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 AWD (2008 – 2008) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 (2009 – 2012) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Rogue 2.5 AWD (2009 – 2012) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 (2012 – 2014) | QR25DE | 4.6 – 4.8 l 4.86 – 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 AWD (2012 – 2014) | QR25DE | 4.6 – 4.8 l 4.86 – 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue Select 2.5 (2014 – ) | QR25DE | 4.6 – 4.8 l 4.86 – 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Rogue Select 2.5 AWD (2014 – ) | QR25DE | 4.6 – 4.8 l 4.86 – 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Model: Nissan Rogue, T31 MEXICO (2008 – 2014) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Rogue 2.5 (Mexico) (2008 – 2008) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Rogue 2.5 AWD (Mexico) (2008 – 2008) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Rogue 2.5 (Mexico) (2009 – 2014) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Rogue 2.5 AWD (Mexico) (2009 – 2014) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Model: Nissan Rogue, T32 (2013 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Rogue 2.5 (2013 – 2013) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 AWD (2013 – 2013 ) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Rogue 2.5 (2014 – ) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Rogue 2.5 AWD (2014 – ) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Nissan Xterra engine oil capacity (USA)
Model: Nissan Xterra, N50 (2005 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Xterra 4.0 (2005 – 2005) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Xterra 4.0 (2006 – 2008) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Xterra 4.0 (2009 – 2012) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Xterra 4.0 (2012 – 2013) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Xterra 4.0 (2014 – ) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Nissan Pathfinder engine oil capacity (USA)
Model: Nissan Pathfinder, R51 (2005 – 2013) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Pathfinder 4.0 V6 (2005 – 2005) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 4.0 V6 (2006 – 2006) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 4.0 V6 (2007 – 2007) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Pathfinder 4.0 V6 (2008 – 2008) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 4.0 V6 (2009 – 2013) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 5.6 V8 (2008 – 2008) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 5.6 V8 (2009 – 2013) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Model: Nissan Pathfinder, R52 (2013 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Pathfinder HEV 2WD (2014 – 2014) | QR25DE | 5.8 l 6.13 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Pathfinder HEV 4WD (2014 – 2014) | QR25DE | 5.8 l 6.13 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Pathfinder 3.5 V6 2WD (2013 – 2013) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 3.5 V6 4WD (2013 – 2013) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Pathfinder 3.5 V6 2WD (2014 – ) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Pathfinder 3.5 V6 4WD (2014 – ) | VQ35DE | 4.8 l 5.07 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Nissan Armada engine oil capacity (USA)
Model: Nissan Armada, WA60 (2005 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Armada 5.6 V8 (2005 – 2006) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Armada 5.6 V8 (2007 – 2008) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Armada 5.6 V8 (2009 – 2012) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Armada 5.6 V8 (2012 – 2014) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Armada 5.6 V8 (2015 – ) | VK56DE | 6.7 l 7.08 US Quarts / Filter: 0.2 l 0.21 US Quarts | 5 000 miles / 6 months |
Nissan Quest engine oil capacity (USA)
Model: Nissan Quest, RE52 (2011 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Quest 3.5 (2011 – 2012) | VQ35DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Quest 3.5 (2012 – 2014) | VQ35DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Quest 3.5 (2015 – ) | VQ35DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Nissan Frontier engine oil capacity (USA)
Model: Nissan Frontier, D22 (1999 – 2004) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Frontier 2.4 RWD (1999 – 1999) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 RWD (2000 – 2000) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 RWD (2001 – 2001) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Frontier 2.4 RWD (2002 – 2002) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 RWD (2003 – 2003) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 RWD (2004 – 2004) | KA24DE | 3.5 l 3.7 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 AWD (1999 – 1999) | KA24DE | 3.9 l 4.12 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 2.4 AWD (2000 – 2000) | KA24DE | 3.9 l 4.12 US Quarts / Filter: 0.2 l 0.21 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (1999 – 1999) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (2000 – 2000) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (2001 – 2001) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (2002 – 2002) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (2003 – 2003) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 (2004 – 2004) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (1999 – 1999) | VG33ER | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (2000 – 2000) | VG33ER | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (2001 – 2001) | VG33ER | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (2002 – 2002) | VG33ER | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (2003 – 2003) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 3.3 Supercharged (2004 – 2004) | VG33E | 3.3 l 3.49 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Model: Nissan Frontier, D40 (2005 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Frontier 2.5 (2005 – 2005) | QR25DE | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2006 – 2006) | QR25DE | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2007 – 2007) | QR25DE | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2008 – 2008) | QR25DE | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2009 – 2012) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2012 – 2013) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2005 – 2005) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2005 – 2005) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2006 – 2006) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2006 – 2006) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2007 – 2007) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2007 – 2007) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2008 – 2008) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2008 – 2008) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2009 – 2012) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2009 – 2012) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 2WD (2012 – 2013) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 4.0 4WD (2012 – 2013) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Frontier 2.5 (2014 – ) | QR25DE | 4.6 l 4.86 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Frontier 4.0 2WD (2014 – ) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Frontier 4.0 4WD (2014 – ) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Model: Nissan Frontier, D40 MEXICO (2010 – )
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Frontier 4.0 2WD (Mexico) (2010 – ) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Frontier 4.0 4WD (Mexico) (2010 – ) | VQ40DE | 5.1 l 5.39 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Nissan Titan engine oil capacity (USA)
Model: Nissan Titan, TA60 (2004 – ) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Titan V8 (2004 – 2005) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Titan V8 (2006 – 2006) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Titan V8 (2007 – 2007) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Advertisements | |||
Titan V8 (2008 – 2008) | VK56DE | 6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Titan V8 (2009 – 2012) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Titan V8 (2012 – 2013) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles / 6 months |
Titan V8 (2014 – ) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles / 6 months |
Model: Nissan Titan, TA60 MEXICO (2011 – )
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
Titan V8 (Mexico) (2011 – ) | VK56DE | 6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts | 6 000 miles / 6 months |
Nissan 350Z / 370Z engine oil capacity (USA)
Model: Nissan 350Z, Z33 (2002 – 2009) (USA)
Engine | Capacity/Filter | Oil Change Intervals | |
---|---|---|---|
370Z (2009 – 2012) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles/ 6 months |
370Z (2013 – 2013) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles/ 6 months |
370Z (2014 – ) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles/ 6 months |
Advertisements | |||
370Z NISMO (2009 – 2012) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles/ 6 months |
370Z NISMO (2013 – 2013) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 7 500 miles/ 6 months |
370Z NISMO (2014 – ) | VQ37VHR | 4.9 l 5.18 US Quarts / Filter: 0.3 l 0.32 US Quarts | 5 000 miles/ 6 months |