1. NOS NSJ0301 3 Tons Aluminum Floor Jack

2. Arcan ALJ3T Aluminum Low Profile Floor Jack

3. Arcan ALJ2T Aluminum Floor Jack

4. Jegs 80077 Racing Aluminum Floor Jack

5. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift

6. Sunex 6603ASJ Aluminum Floor Jack

7. OTC 1532A Racing Aluminum Floor Jack

8. Arcan ALJ3T, Aluminum Floor Jack, 3 Ton Capacity

Best aluminum floor jack

Choosing the best jack for your garage sounds simple enough – that is, until you start your search and are quickly overwhelmed by all the decisions. There are smaller jacks, budget jacks, low profile jacks, high lift jacks, aluminium jacks, 2 ton, 3 ton and heavy duty jacks, to name a few. That’s why we’ve decided to make things easier for you by narrowing down all these decisions while reviewing the top floor jacks based on your needs.

High lift floor jack

When it comes to floor jacks, aluminium models are becoming increasingly popular. The reason for this is obvious – they are typically lighter than their steel counterparts, yet offer all the strength and functionality required when using a jack. If you are racing any kind of race (track days, autocross, dragstrip, etc.), a good aluminium jack is a necessity for its portability factor alone.

The aluminum floor jack is a lightweight, robust and flat floor jack that is used by both professionals and amateurs. Although made of aluminum, it is still very durable and does not break under load as most models have a reinforced lifting arm.

In addition, aluminum has excellent resistance to various types of substances such as engine oil, brake oil or grease that you normally find in a garage or garage. For you car you need a good portable air compressor.

Aluminum floor jack extension

What this means is that by going with this type of jack you are guaranteed to get a durable, robust and durable jack that can be used for a wide range of lifting and vehicle repairs.

If you are fresh on the market for the best aluminum floor jack for the money, we have exactly what you need! Below we have reviewed some popular models and given you our impressions. Let’s have a look at them!

One thing we would like to note is that most of the floor lifts available today are manufactured overseas. American jacks can be bought, but you pay on average three times or more the price for one. Although we want to recommend American jacks, it simply doesn’t make economic sense, as there is little evidence that such a jack works three times as well and is worth such a high price to the average consumer.

We have a weakness for aluminium jacks because they don’t rust or corrode, are light, but at the same time stable and strong enough to carry most weights. In my opinion, the following accessories are the best on the market.

Top rated aluminum floor jack

You can also read other Floor Jack reviews on the same niche, such as Low Profile Floor Jack, 3 Ton Floor Jack, Powerzone 380044 Floor Jack.

1. NOS NSJ0301 3 Tons Aluminum Floor Jack


Buy NOS NSJ0301 3 Tons Aluminum Floor Jack

View on Amazon

  • Load capacity: 3 tons
  • Stroke range: 3.75 inch – 18.125 inch – 18.125 inch

The NOS NSJ0301 is a popular aluminum floor jack that is used by professionals and beginners alike. This flexible model is available in a variety of lifting capacities ranging from 1.5 tons to 3 tons to meet your needs.

One of the best things about this model is its exceptional construction, which gives it a first class look and feel. There is a lot of attention to detail in this floor jack. In addition, the lifting arm is reinforced so that you can use this jack even under difficult conditions.

In addition, the saddle has a grooved rubber surface that prevents it from slipping over the lift of your vehicle. This is an excellent safety feature that helps prevent the risk of injury.

In addition, with the help of the front rollers and the rear rollers, you have no difficulty whatsoever moving this floor jack in your garage or workshop.

Overall, if you are looking for a reliable and high quality floor jack, the NOS NSJ0301 is definitely one of the best 3-ton aluminum floor jacks for the money.


  • Reinforced lifting arm. Durable and long lasting.
  • Flexible. Available in different weight capacities to meet your needs.
  • Easy mobility in the workshop thanks to the front castors and rear castors.


  • This aluminum floor jack has difficulty working with large vehicles like an SUV.

2. Arcan ALJ3T Aluminum Low Profile Floor Jack

Buy Arcan ALJ3T Aluminum Low Profile Floor Jack

View on Amazon

  • Load capacity: 3 tons
  • Stroke range: 3.6 inch – 19.4 inch – 19.4 inch

When you talk about high-quality aluminium floor jacks, the Arcan brand comes to mind. The ALJ3T is one of the best-selling jacks and a first choice for individuals, garages and businesses. It is appreciated for its rugged construction that guarantees long life, good loading capacity for most vehicles and good safety features. In addition to the strong aluminium, it is also equipped with many reinforcements that provide additional stiffness and accident prevention.

The Arcan ALJ3T is designed to be easy to use and has a durable and long-lasting aluminum floor jack. The construction of this base tray is executed with exceptional attention to detail.

In addition, you will find 2 side handles that allow you to move it quickly and easily when working under your vehicle. As expected, the saddle is large and non-slip, which increases safety during use.

One of the best things about this model is definitely its decent stroke range with a minimum of 3.6 inches and a maximum height of 19.4 inches. With such values, you will have no difficulty working with both a flat sports car and a large SUV.

Best of all, the carrying capacity of this aluminum floor jack is designed for 3 tons, so it is also very flexible in this department.

Considering its solid construction, rich feature set and flexible lifting range, this jack is definitely one of the best low profile aluminum floor jacks on the market today.


  • A very good construction. Durable and long lasting.
  • 2 side handles allow you to easily move this floor jack under your vehicle.
  • The two-piston system makes it possible to lift vehicles faster and with less effort.
  • The hydraulic system is shielded to prevent oil contamination.


  • None.

2 Ton aluminum floor jack

3. Arcan ALJ2T Aluminum Floor Jack


Buy Arcan ALJ2T Aluminum Floor Jack

View on Amazon

  • Load capacity: 2 tons
  • Stroke range: 3.5 in. to 19.25 in.

The Arcan ALJ2T is a 2-ton version of the ALJ3T that we just reviewed above. This model is characterized by a durable construction and a deep attention to detail. In addition, this company is also very much focused on safety.
In fact, the saddle of this floor jack has a rubber pad that makes it non-slip and safer to lift vehicles.

In addition, the weight capacity is not the best we have ever seen, as it is just a 2-ton aluminum floor jack. For most people, however, this is still more than decent.

To facilitate movement in the workshop, this floor jack is equipped with front castors and rear castors. You will also notice that the side metal handles are very handy and allow you to quickly and easily position your floor jack under your vehicle.

This jack is equipped with quick lifting capabilities, which are made possible by the special design of the oil pump. A great thing about this jack is the fact that it successfully transforms your train into a considerable force strong enough to lift most of the standard transport vehicles.

Of course, this floor jack is also ASME-approved, which means that it is safe to use even for beginners. Overall, just like the ALJ3T, Arcan’s ALJ2T is a safe and robust aluminum floor jack you can rely on as long as you use it on a vehicle weighing 2 tons or less.


  • Excellent construction execution. Durable and long-lasting.
  • ASME and PALD safety standards.
  • Lateral handles facilitate movement under the vehicle.


  • Maximum load capacity of only 2 tons.

4. Jegs 80077 Racing Aluminum Floor Jack

Buy Jegs 80077 Racing Aluminum Floor Jack

View on Amazon

  • Load capacity: 3 tons
  • Stroke range: 3.5 in. to 19.25 in.

The Jegs 80077 is an aluminum floor jack that we really like. This model not only has an excellent construction, which is very durable, but also a striking yellow color, which makes it well visible in the workshop.

In addition, the handle is coated with a foam material that prevents you from scratching your vehicle paint when using this floor jack. When it comes to the lift range, it is quite neat and works with almost all vehicle types, from very flat sports cars to large SUVs.

If you are looking for a racing aluminum floor jack, you have come to the right place. The Jegs 80077 is a well-built and professional jack that allows you to lift any type of vehicle up to 3 tons quickly and easily.


  • Very efficient pump effect during lifting. Allows you to lift a vehicle in seconds.
  • The handle is foamed to prevent you from scratching the paint.
  • Excellent weight capacity of 3 tons.


  • None.

5. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift

Buy Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift

View on Amazon

  • Load capacity: 3 tons
  • Stroke range: 4 inches to 18.25 inches

The Powerzone 380044 is an interesting floor jack that uses a mixture of aluminum and steel to make it a very durable and long-lasting floor jack. In addition, this combination is an ideal candidate for use in a busy workshop as it is highly resilient.

When it comes to security, there is nothing to worry about. The saddle has a non-slip rubber that prevents your jack point from slipping at any time. In addition, the hydraulic system is very efficient and has overload protection.

This overload protection prevents you from using these jacks on a vehicle weighing more than 3 tons for your own safety. In addition, the handle is coated with a foam material that prevents you from scratching your paintwork during the lifting process.

Although this model is slightly heavier than others are, it is still quite easy to move in the workshop thanks to its front castors and rear castors.


  • Excellent construction with a lightweight aluminum frame and a steel lifting arm.
  • Easy to move in the workshop thanks to the front rollers and rear rollers.
  • The handle has a foam material that prevents you from scratching the paint.
  • Heavy Duty Hydraulic System.


  • There is no guarantee on this floor jack.

3 Ton aluminum floor jack

6. Sunex 6603ASJ Aluminum Floor Jack


Buy Sunex 6603ASJ Aluminum Floor Jack

View on Amazon

  • Load capacity: 3 tons
  • Stroke range: 6.5 in. to 19.3 in.

The Sunex 6603ASJ is a high-resolution aluminium floor jack designed specifically for working on tall vehicles such as an SUV or a car with a large-diameter rim. In fact, with its stroke range of at least 6.5 inches and maximum 19.3 inches, it will have difficulty working on very flat cars.

In addition, one of the things we like most about this aluminium floor jack is the combination of different materials such as aluminium and steel, which makes it very durable and long lasting. In addition, the lift arm is additionally reinforced so that it can lift a vehicle of up to 3 tons with great ease.

Speaking of ease of use, this model is also extremely beginner-friendly, and if you’ve never owned an aluminum floor jack before, you won’t have any trouble operating this Sunex floor jack.


  • Durable and long-lasting.
  • Excellent security. The saddle pad is large and non-slip.
  • The lateral handle and the large front rollers facilitate the movement.


  • Due to its high minimum height it is not the best aluminium floor lift for low profile vehicles.

7. OTC 1532A Racing Aluminum Floor Jack


Buy OTC 1532A Racing Aluminum Floor Jack

View on Amazon

  • Load capacity: 2 tons
  • Stroke range: 3.5 in. to 18 in.

When it comes to lifting technology and efficiency, the OTC 1532A is unbeatable. In fact, this model is a good aluminium floor jack equipped with powerful and efficient pump hydraulics. It allows you to fully lift a vehicle with 7.5 pumps.

In addition, the saddle pad is large and prevents the Jack Point from slipping, thus posing a safety risk. When it comes to the left arm, it is reinforced, which makes this model a robust aluminium floor jack that can be used by professionals.

For portability, this model has both front castors and rear castors that allow you to move it quickly and easily. In addition, you also have 2 side metal handles for portability under your vehicle.

The only concern we have with this racing aluminum floor jack is that it has a limited weight capacity of only 2 tons. However, this is still more than acceptable to most people, especially those who plan to use it for casual repairs such as rim or tire repairs.


  • High-performance and efficient hydraulic system with pumping action.
  • Easy to move in the workshop.
  • Foam on the handle to prevent it from scratching the paint.


  • The price is higher compared to other models with almost the same equipment.

8. Arcan ALJ3T, Aluminum Floor Jack, 3 Ton Capacity

Buy Arcan ALJ3T, Aluminum Floor Jack, 3 Ton Capacity

View on Amazon

This professional quality Arcan aluminium quick lift has a lifting capacity of 3 tons and a minimum lifting height of 3 3/4 inches for easy access under flat profile vehicles. The ball bearing rear castors and wide track front wheels provide easy maneuverability and lift stability under load. A saddle pad protects the frame and components of the vehicle. Complies with ASME PALD Standard 2009.

High capacity, higher heights. Get the power of a pro with this flat jack. This power pack can safely lift up to 3 tons and is therefore ideal for cars, trucks, vans or SUVs. Lift your load quickly and easily from the 3 3/4 inch minimum height to a maximum lifting height of 18 1/4 inches.


  • Prevents over-extension of hydraulic ram and jack use beyond rated capacity.
  • 2 PIECE HANDLE: Allows for easy storage.
  • Designed with a rubber saddle and a foam handle bumper.


  • There is no guarantee on this floor jack.


If you do any kind of work on your automotive, you probably already know the big convenience of having a properly working floor jack. When it comes to picking the best floor jack, it can prove to be a difficult decision when you have so many brands.

What you need to consider when buying floor jacks


This is the main function that you should consider as it ensures both the reliable use of the tool and its life. Durability is the main factor that determines whether you have made a good investment or not. A tool that cannot withstand the toughest tasks could also be dangerous. Therefore, it is important that you find a product that is robust and durable to ensure full safety when working in the garage.


In general, it is not an easy task to move the jack, no matter how light it is, but you should definitely look for the product that offers you more transport options. Easy transport improves your overall efficiency and performance in the garage by saving your time and helping you tailor the workplace to your needs.

The feature that is also useful and improves the mobility of the base tray is the flat design of the base tray. This design helps you to position the floor lifter under the vehicles in areas with low headroom. This function significantly increases the number of vehicle types on which you can use the floor pan.

Load capacity

This is also one of the most important factors you need to consider before buying a floor tray. Lifting power is a key feature because you know how much the floor pan can lift. Some jack models have enormous lifting capacity without quick lifting functions and some jack models have lower lifting capacity but can lift heavy loads in seconds. Depending on your needs, make sure you have chosen the model that will allow you to lift more and save time.

​Aluminum vs. Steel Floor Jack

Even if the steel floor jack is the most popular solution for professionals and beginners, there are several advantages and benefits to choosing an aluminum floor jack instead of a steel model. Here are some of these remarkable aspects:

  1. Weight
    On the one hand, the aluminium floor lift is lighter and can easily be carried in the workshop. This is particularly advantageous if you have a large workshop and have to carry your floor jack around with you.The same cannot be said of a steel floor jack, which is usually very heavy and you will have difficulty moving it, even if it is equipped with front rollers and rear rollers.In addition, most aluminum floor jacks usually have rear and side handles that make them even easier to move, especially if you are working in a tight area under your car.
  2. Strength
    Even though aluminium is physically much less durable than steel, modern manufacturing processes have managed to ensure that, the aluminium floor jack is still very durable and long lasting. This is because the aluminium floor jack uses high quality aluminium that is thick and durable.In addition, many parts of the aluminium floor jack, such as the lifting arm, are reinforced with steel, making it very durable and suitable for heavy lifting purposes. This reinforced lifting arm will be comparable to a steel floor jack, but much lighter.
  3. Substance resistance
    One of the best things about aluminium is that it is very resistant to substances such as brake oil or grease that are normally found in a garage. Since aluminium does not absorb any of these substances, it is also easy to clean with a dry cloth.

Hydraulic floor jack maintenance tips

The first thing you want to do when you receive your new floor jack is to properly bleed or purge the system of air. Air can sometimes be introduced into the system during the assembly, shipping, and transportation of the floor jack and could potentially cause it to fail while under load.

The process is simple and should be described step by step in your manual. Normally, it is sufficient to open the drain valve by turning your carriage handle counterclockwise, then remove the oil filler plug with a screwdriver, and then pump the handle up and down ten times or so. Replace the filling plug and you are ready to use. Even if it is new, it is advisable to check the oil level at this time.

Check your jack regularly, including the oil level. Jack fluid can be purchased from your local auto parts store, hardware store or here at Amazon. Keep the hinge points and wheels of your jack well lubricated and check for loose nuts and bolts. Some bushings even have Zerk fittings. Always use heavy grease and no oil.

Never use your jack as a jack stand. More people have been injured by the failure of the jack without using a supporting stand.

When transporting a jack, always open the drain valve. Never transport it on its side or upside down. Otherwise, air may enter the closed system and cause the jack to fail when lifting.

Finally, keep your jack clean and store it in a dry environment. It lasts longer and facilitates inspection or detection of leaks.

How to Buy an Aluminum Floor Jack

  1. Vehicle types
    The type of vehicle on which you will be using your aluminum floor jack is important. This is because the aluminium floor jack does not work or at least is not recommended to be used on almost any type of vehicle.For optimum performance, the aluminium floor jack should be used on a vehicle of appropriate weight.In addition, since it is a flat floor jack, it is best to use on low-profile vehicles such as sports cars and not SUVs, RVs or motor homes that are usually taller.
  2. Load capacity
    Essentially, the weight capacity tells you the maximum weight the aluminium floor jack can handle before it either becomes a safety risk or refuses to work.For most models, 3 tons is the average weight capacity of the aluminum floor jockey. 3 tons are still sufficient as most vehicles are under 2 tons in weight.
  3. Construction
    The building construction and the quality of the construction is another important aspect. What the construction quality will tell you is how long the aluminium floor lift will last and whether it can be used for heavy lifting applications or not.A cheaply manufactured aluminium floor jack will not perform well under heavy loads in a busy workshop. For occasional use in your personal garage, however, it can be a lot.If you buy an aluminium floor lifter for professional use, we recommend that you choose the highest quality construction. For personal and occasional use, most aluminium floor jacks offer good performance and are more than sufficient for lifting vehicles.
  4. Handle
    The handle is the part that you hold and that activates the hydraulic pump mechanism of the aluminum floor jack. While you can use a simple metal rod for this, we recommend that you choose a model with a foam coated handle. This will ensure that you do not scratch your vehicle paint when lifting the vehicle.
  5. Usability
    One of the most important aspects of the aluminum floor jack is definitely its ease of use. This is due to the fast pump function with a hydraulic system that makes it easy to lift a vehicle in seconds with minimal effort.Make sure that your aluminium floor jack is equipped with a quick pump handle and that it has a locking mechanism that allows you to quickly and easily position the floor jack.In addition, for ease of use, it is always a good idea to choose a model equipped with rear and side handles that make it easy to move the jack.
  6. Safety
    Safety is perhaps the first thing you need to take into account with the aluminium floor jack. Most models are equipped with a safety function that prevents you from overloading the floor jack. For example, you cannot use a 3-tonne floor lifter on a vehicle that weighs 5 tons.In addition, for best safety, make sure that your aluminium jack is ASME certified as this is a strict standard that will show you how safe your jack is.


A floor jack is provided as a device to lift a vehicle ready to drive – not to hold the vehicle for long periods of time (although the Powerbuilt has this possibility – it can be locked in place). Once you have lifted the vehicle to the required height, you should support it with lift stands.

By using wood or special lifting blocks it is possible to give the jack a little more height. You should never use things like bricks, as they tend to break or break, which could endanger your life.

Always use the jack on a flat surface, and if possible try to keep the car as flat as possible to prevent it from trying to roll in one way or another – even if it cannot roll from the jack, the view of a car plus the jack can be (best) annoying. Remember that a car is heavy.


As we have seen, the aluminium floor jack offers many advantages over other types of floor jacks. On the one hand it is lighter and easy to move in the workshop.

In addition, it can still be used as a heavy duty floor jack and is the ideal companion for your garage or workshop, especially for those working on low profile vehicles.

The comparison focused on critical issues such as robustness, functionality, reliability, effectiveness, duality, corrosion and rust resistance and ease of use. With each of these elements, you can be sure that you will own one of the best aluminium floor lifters on the market.

Finally, if you still haven’t found a suitable machine for your needs and purpose, we recommend that you review our aluminium floor lift report above.

Aluminum Floor Jacks for Garage and Workshop Video

David Muench (Carnes Mechanical)

David Muench (Carnes Mechanical)

Hey, I’m David. I’ve worked in a cars store for 6 years. I write reviews and guides, helping people to choose the most suitable technicals and best product for them. I’m happy to finally share my knowledge of the industry here, on CarnesMechanical.

One Comment

  • sirglio frei says:

    Have you ever thought about including a little bit more than just your articles? I mean, what you say is important and everything. However think about if you added some great visuals or video clips to give your posts more, “pop”! Your content is excellent but with pics and clips, this site could undeniably be one of the best in its field. Amazing blog!

Leave a Reply