Best oil for toyota 4runner

1. Castrol 06240 EDGE Extended Performance 0W-20 Advanced Full Synthetic Motor Oil
2. Liquimoly 2208 0W-20 Special Tec AA Motor Oil
3. Castrol 03086 EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil
4. Liqui Moly 2039 Longtime High Tech 5W-30 Synthetic Motor Oil
5. Red Line 15205 5W20 Motor Oil
6. Idemitsu Full Synthetic 0W-20 Engine Oil SN/GF-5
7. Genuine Toyota (00279-0WQTE-01) Motor Oil
8. Idemitsu 30010091-95300C020 Full Synthetic 5W-20 Engine Oil
9. Toyota Genuine SAE 5W-20 946 ML Motor OIl
10. Idemitsu 30010099-95300C020 Full Synthetic 5W-30 Engine Oil
11. Castrol 03093 GTX 10W-30 Motor Oil
12. Pennzoil Platinum Full Synthetic Motor Oil 10W-30
13. Valvoline 779462 Automotive Accessories

Toyota Highlander Best Engine Oil

Best oil for Toyota 4runner

Best oil change for toyota 4runner

Change the oil in your Toyota 4Runner 2003-2009, 4.7L V8 engine, to improve engine performance and longevity.

It is generally recommended that you change your vehicle’s oil every 3,000 miles for extreme operating conditions. However, this number may vary depending on your operating conditions, the age of your vehicle, the number of miles on your engine, and your driving habits. The use of synthetic oils can help reduce engine wear and tear and is recommended for older engines or when your typical journey requires extended periods of stop-and-go traffic.

All engine oils contain phosphorus as part of the additive package to prevent engine wear. Castrol GTX High Mileage’s advanced formula is specially formulated with less phosphorus than other leading high performance and conventional oils, which helps prevent catalyst and emission system failure. Our new review about Best oil for Honda Accord you can read on our site.

1. Castrol 06240 EDGE Extended Performance 0W-20 Advanced Full Synthetic Motor Oil

2. Liquimoly 2208 0W-20 Special Tec AA Motor Oil

3. Castrol 03086 EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil

4. Liqui Moly 2039 Longtime High Tech 5W-30 Synthetic Motor Oil

5. Red Line 15205 5W20 Motor Oil

6. Idemitsu Full Synthetic 0W-20 Engine Oil SN/GF-5

7. Genuine Toyota (00279-0WQTE-01) Motor Oil

8. Idemitsu 30010091-95300C020 Full Synthetic 5W-20 Engine Oil

9. Toyota Genuine SAE 5W-20 946 ML Motor OIl

10. Idemitsu 30010099-95300C020 Full Synthetic 5W-30 Engine Oil

Best semi synthetic oil for Toyota 4runner

11. Castrol 03093 GTX 10W-30 Motor Oil

12. Pennzoil Platinum Full Synthetic Motor Oil 10W-30

13. Valvoline 779462 Automotive Accessories

Best gear oil for toyota 4runner

WHAT YOU NEED

There are some key components you will need to change the oil on your 5th Gen 4Runner. Here is a list of everything you need:

  • 6.6 liters 0W-20 oil (I recommend Mobil 1)
  • Factory oil filter or the TRD oil filter
  • Funnel
  • Gaskets for oil drain plugs
  • Cloth for cleaning and wiping off oil
  • 10, 12 and 14 mm sockets
  • Ratchet drive for sockets (3/8 inch)
  • 64mm oil filter wrench
  • Oil drip pan
  • Latex gloves
  • User manual can help

HOW TO CHANGE THE OIL AND OIL FILTER ON THE 5TH GENERATION TOYOTA 4RUNNER.

The oil change is much more important than the type of oil. Get yourself an oil with seal conditioners like you found it, and you should be fine. Do you have AGM Battery? So you want to know how to test an AGM battery.

There are many different types of maintenance you can perform on a vehicle, but probably the most important is changing the oil in your vehicle. If you want a reliable and durable vehicle, I would suggest changing your oil every 5,000 miles. You may not have to change it so often with synthetic oil, but it is worth the money. You should really only use synthetic oil, like Mobil 1. Although a 4-runner is bulletproof, an oil change is necessary and only helps in a smoother, longer lasting vehicle.

HOW TO CHANGE YOUR OIL – STEP BY STEP

STEP 1 – GOOD LOCATION

The first step is to find a place where you can change the oil on your car. I can fit under my 4Runner without a ramp or lift, but if you need to and want to lift your car, do so accordingly.

STEP 2 – GRAB SOME LATEX GLOVES

Always wear protective gloves and glasses when working with engine oil. Be careful if your car has been driven recently as the engine, gearbox and exhaust can be very hot. Keep rags or towels nearby to wipe off spilled liquids.
Prepare to change the oil in your 4Runner by putting on some latex gloves. Although this is not necessary, I think it is best to keep your hands as clean as possible from oils and fats. The use of gloves also helps with quick cleaning, as grease can sometimes be very hard to get from the hands.

STEP 3 – REMOVE THE SLIDE PLATE COVER

If your 4Runner is equipped with a front skid plate, you must remove the small cover on the skid plate that gives you access to the oil drain plug.

You must remove this cover using a 12 mm socket wrench and ratchet. After removing the screws, put aside the small sliding plate that covers the oil drain plug. I suggest that you put the screws on this small slide plate so that you can easily find them when it is time to put the cover back on.

STEP 4 – REMOVE THE OIL DRAIN PLUG

Prepare to remove the oil drain plug and drain the oil from your 4Runner. To do this, you will need a container to collect the oil that is leaking from the bottom. Although some oil will be lost through vehicle operation, plan for at least 6.6 quarts to come out (as this is the amount you are using).

After placing a container under the drain plug to collect the oil, use a 14 mm bushing and ratchet to loosen the drain plug. After the drain plug has loosened sufficiently, unscrew it by hand.

Make sure that you hold the drain plug tight and try not to let it fall into the oil collector. After removing the drain plug, the oil will quickly leak, so be ready to put your hand out of the way and drain the oil into the container.

In the meantime, you can wipe off any impurities from the drain plug with a clean microfiber cloth. Then set the drain plug aside until later.

STEP 5 – REMOVING THE FRONT SLIDE PLATE AND COVER

As your oil drains, remove the front slide plate and slide plate cover. You might ask why you need to do this, and the simple reason is to change the oil filter. You will not have access to the oil filter unless you remove the front skid plate and the skid plate cover.

To remove the cover, you will need a 10 mm socket wrench and a ratchet to remove five (5) screws. There is also one (1) pressure bolt that you must remove. Once you have removed the cover, you have access to remove all four (4) screws holding the sliding plate.

To remove these screws, use a 12 mm socket and a ratchet. A very important piece of advice is to first remove the front screws on the sliding plate. Then you must hold up the sliding plate and remove the rear two. If you do not hold the sliding plate when removing the last screw, the sliding plate will fall down and hit you. Although it does not weigh too much, it probably will not feel good. The front of the skid plate is on a hinge that is unhooked.

Take your time and turn the back of the sliding plate towards the floor to remove the sliding plate from the hinge. After removing the skid plate, place it on or near the side with the screws.

STEP 6 – REMOVE THE OIL FILTER

At this stage you will want to remove the oil filter – which I think is the most complex part of the whole process, but still quite simple. Before removing the filter, reinsert your drain plug and the small sliding plate that covers the drain plug. Then move the container where you collect your oil so that it is under the oil filter.

Using a ratchet with a 3/8″ extension, remove the metal plugs from the oil filter. Some oil drips out, so make sure you have a container to catch it. Your new oil filter should be supplied with a plastic tool to drain some oil further. All you have to do is push it into the bottom of the filter. The oil should then leak. Wait until the oil has leaked and then remove the plastic blow tool. In addition to removing the plastic drain tool, a small O-ring should also come out. This is garbage, so throw away the drain tool and the small O-ring.

Now you can remove the current filter. Use your 64 mm filter key and remove the filter housing. Make sure that you observe a small metal clip on the side of the housing. This tab should be aligned at the same point when the filter is reinstalled. After completely unscrewing the filter, remove the old filter from the housing and throw it away.

There is also an O-ring on the housing, which must be removed. You do not need any screwing tools and should be able to remove this O-ring easily by hand. I would recommend doing this by hand, as you do not want to damage the plastic threads.

STEP 7 – NEW O-RING FROM THE FILTER BOX

Remove your new O-ring from the filter box and coat it with some oil. Then place it on the filter housing. Make sure it sits all around. Then place your new filter in the housing. You do not have to worry about orientation as there is no right way up.

STEP 8 – SCREW THE FILTER ASSEMBLY BACK IN

Be sure to tighten until the metal indicator tab returns to its original position before removing the filter housing. Now install the small O-ring into the filter housing by first coating it with a small amount of oil and then placing the O-ring on the drain area of the filter housing. You can then reinsert the metal drain plug into the filter housing. You do not have to overtighten it, so just make sure it is tight.

STEP 9 – OIL CHANGE

After checking that your drain plug and oil filter are back in place, install 6.6 liters of 0W-20 oil into your 4Runner. Use a funnel as you do not want to splash oil on your engine.

STEP 10 – CHECK FOR LEAKS

When you have installed all 6.6 liters of oil, check the drain plug and filter housing and make sure there are no leaks. If you do not find any, you can install the slide plate and slide plate cover.

STEP 11 – RESET THE MAINTENANCE LIGHT

Now that you have completed the actual oil change procedure, you must reset your service light so that you know when to change it again. To do this, you need the key to your vehicle.

Turn your key into accessory mode (to the stop without actually starting the car).

Make sure that your odometer reads Trip A. If this is not the case, press the button to the right of the speedometer to access Trip A.

After checking that Trip A has been activated, turn the key to the Off position. Press and hold the odometer button, then turn the button back to the accessory mode. The screen should display the maintenance reset message.

Press and hold the odometer button until the service light is reset. After you have done this, you are good to go for another 5,000 miles.

  • Start the truck and check for leaks underneath. If there are leaks, switch off the truck and check whether the drain plug or the filter must be tightened.
  • After running the engine for a few minutes, allow it to cool for at least 15 minutes to check the oil level again. If the oil level is more than 1/2″ above the upper hole of the dipstick, drain the oil. If the oil level is below the lower hole of the dipstick, you will need to top up oil.
  • Drain all oil from your old oil filter for 12-24 hours.
  • Take your old oil and filter to a recycling facility. Most automotive parts dealers and garages accept this free of charge. Some cities and/or counties have a service where they collect used oil and filters from home. For more information, visit the American Petroleum Institute’s website on the collection and recycling of used engine oil.

Best engine oil for Toyota 4runner

1. Castrol 06240 EDGE Extended Performance 0W-20 Advanced Full Synthetic Motor Oil

Buy Castrol 06240 EDGE Extended Performance 0W-20 Advanced Full Synthetic Motor Oil

View on Amazon

Castrol EDGE Extended Performance is Castrol’s most advanced fully synthetic engine oil. It offers ultimate performance for extended runoff of 20,000 miles or an entire year. Castrol EDGE Extended Performance with Fluid TITANIUM technology is the first choice for drivers of passenger cars, light commercial vehicles and SUVs who demand outstanding performance and protection over a full year or 20,000 miles. Create exhilarating performance with any drive.

Pros:

  • Allows extended runs of 20,000 miles or a full year (whichever comes first).
  • Improves oil film strength by 30% and reduces friction when performance drops.
  • Three times stronger than Mobil1 against viscosity degradation
  • Ten times stronger against oil thickening at high temperatures to achieve maximum performance.

Cons:

  • Difficult to find in the store

2. Liquimoly 2208 0W-20 Special Tec AA Motor Oil

Buy Liquimoly 2208 0W-20 Special Tec AA Motor Oil

View on Amazon

Specifications:

Industry standards: API SN, ILSAC GF 5, Chrysler MS-6395, Ford WSS-M2C 946 A, GM 6094M
Basic inventory: Group IV (100% synthetic)

Liquimoly 2208 is manufactured in Germany, but remarkable is that it was developed for Japanese and American cars.

As such, it is approved for both the American Petroleum Institute and the International Lubricants Standardization and Approval Committee.

In fact, if you exchange your current oil for Liquimoly, you will wonder how you ever managed without it.

Like all 0W-20 synthetics, this oil has an improved temperature range for people living in colder environments.

Therefore, if you are worried about snow and ice damaging your car’s components, you will appreciate the fact that this oil works best during a cold start.

Better yet, it still has a high viscosity even in hot weather.

Pros:

  • Fuel-saving ideal for high mileage vehicles
  • Works best with modern Japanese and American cars.
  • Improved vehicle performance
  • Perfect for cold starts and hot weather
  • 100% synthetic
  • Made in Germany

Cons:

  • Pricier than other similar oils

3. Castrol 03086 EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil

Buy Castrol 03086 EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil

View on Amazon

Castrol 03086 Extended Performance Advanced 5W-20 Fully Synthetic Engine Oil is exactly what your engine needs to work consistently in changing environments. It comes from the huge, hugely popular global company Castrol, one of the most dominant producers of synthetic oil.

In fact, they produce some of the best synthetic engine oils, making their oils a safe choice for car owners. The Castrol 03086 EDGE is one of them, and exactly what your car and engine need to run perfectly.

Unique structure

It reacts efficiently to the different pressures, temperatures and requirements of the various metal-to-metal contact points in the engine at different speeds. Castrol EDGE has a unique structure and was developed using liquid titanium technology. This technology physically changes the behavior of the oil at high pressures by doubling its oil film thickness. In this way, the oil reduces friction in the engine.

Pros:

  • Helps reduce contact between metals while driving at different speeds.
  • Improves fuel economy by reducing the formation of engine deposits.
  • Fluid retention technology provides maximum strength even under pressure.
  • Recommended for use in extreme driving conditions such as idling, towing, pulling, high performance driving and while driving in wet and dirty conditions.
  • Extended oil change interval of 15,000 miles under normal driving conditions
  • One of the best 5w-20 synthetic engine oils on the market.
  • Affordable price for a 5 square meter bottle.
  • Wear reduction of the engine by titanium additive
  • Perfect for drivers who are serious about maintaining their car.

Cons:

  • Complaints about reduced fuel consumption

4. Liqui Moly 2039 Longtime High Tech 5W-30 Synthetic Motor Oil

Buy Liqui Moly 2039 Longtime High Tech 5W-30 Synthetic Motor Oil

View on Amazon

With around 4,000 articles, LIQUI MOLY offers a worldwide, uniquely broad spectrum of automotive chemicals: engine oils and additives, greases and pastes, sprays and car care, adhesives and sealants. Founded in 1957, LIQUI MOLY develops and produces exclusively in Germany. There it is the undisputed market leader for additives and is repeatedly voted the best oil brand.

Synthetic technology low-friction engine oil with state-of-the-art wear protection technology and extremely high power reserve for maximum performance. Good dirt absorption and cleaning properties ensure optimum engine cleanliness. Ensures reliable operation and maximizes diesel particulate filter (DPF) life. Exceeds the highest test requirements of renowned vehicle manufacturers.

Pros:

  • Smooth-running engine characteristics
  • Long engine life due to excellent wear protection
  • Fast oil production at low temperatures
  • Optimum oil pressure at all engine speeds
  • Highest lubrication safety at high and low temperatures
  • High shear and ageing resistance

Cons:

  • It’s a little bit pricey

5. Red Line 15205 5W20 Motor Oil

Buy Red Line 15205 5W20 Motor Oil

View on Amazon

REDLINE OIL 5W20 4-engine oil / 3.8 l

Oil film at operating temperature thicker than 5W30 or 10W30

Recommended for SM/SL/SJ/SJ/SH/SG/CF and ACEA A5/B5

ABOUT RED LINE MOTOR OIL

Fully synthetic ester-based formula for cars, SUVs, sports cars and boats

Excellent wear resistance and significant friction reduction over a wide working range

Good detergent properties allow for longer service intervals

Improved fuel economy and piston ring operation to increase power

Excellent high-temperature stability and resistance to oxidation improve lubrication of hot metal parts compared to other synthetic oils

High viscosity index provides thicker oil film in bearings and gears

Reduced oil consumption by improving piston ring efficiency

All products are fully compatible with conventional and synthetic engine oils

Pros:

  • Better protection
  • Improved performance
  • Quality you can trust

Cons:

  • Not API certified

6. Idemitsu Full Synthetic 0W-20 Engine Oil SN/GF-5

Buy Idemitsu Full Synthetic 0W-20 Engine Oil SN/GF-5

View on Amazon

Idemitsu fully synthetic engine oil is reliable and offers exceptional protection. With this oil it improves engine performance.

The synthetic base oil and friction-reducing technology help the engine run smoothly. This keeps the engine intact and delivers great power.

When engine oil is cheap, it allows deposits to build up and wear out when the weather changes. However, this 0W-20 engine oil from Idemitsu is different.

The viscosity does not change even under worse conditions. Instead, it ensures proper lubrication and engine cleaning.

The high technical quality of this oil makes it an excellent choice. It provides a tight seal and allows complete fuel combustion.

This results in less soot adhering to the pistons and other components. This top class 0W-20 synthetic oil in turn helps to reduce overall emissions.

Pros:

  • Perfect engine cleaning
  • Minimizes emissions
  • Frictionless additives
  • Compatibility with wide engines

Cons:

  • Only available for petrol engines
  • You will only receive 946 mL oil

7. Genuine Toyota (00279-0WQTE-01) Motor Oil

Buy Genuine Toyota (00279-0WQTE-01) Motor Oil

View on Amazon

Toyota engine oil is recommended for all types of gasoline engines. Thanks to high-quality additives, it ensures low fuel consumption. Excellent low-temperature starting capability.

All original Toyota engine oils meet not only the international standards of the API (American Petroleum Institute), but also the strictest requirements for quality and performance.

Toyota tests its oils under the most realistic conditions and uses the original engines of Toyota cars to test them. Therefore, Toyota lubricants have optimal quality and properties that ensure the best engine performance.

Pros:

  • Fuel savings.
  • Improved thermal stability.
  • Extended replacement intervals.
  • Toyota tested and approved for warranty service.
  • Provides excellent protection for all petrol engines requiring oils with a viscosity of 0w-20/5w-20.

Cons:

  • None

8. Idemitsu 30010091-95300C020 Full Synthetic 5W-20 Engine Oil

Buy Idemitsu 30010091-95300C020 Full Synthetic 5W-20 Engine Oil

View on Amazon

Idemitsu Kosan Co. was founded in 1911 in Moji, Kita-Kyushu. It produces fuel products and basic chemicals, lubricants, engineering synthetics, performance chemicals, organic light emitting diode (OLED) materials. Idemitsu develops clean and energy efficient products.

The container for this oil is 5 liters. Its high-quality friction modifying additive technologies and synthetic base oils save fuel. It protects the engine from wear and tear and minimizes the formation of deposits under any conditions.

This means less oil is burnt and emissions are avoided. Reviewing your car’s owner’s manual is essential when selecting the oil that best suits your car.

With Idemitsu 30010091-530 C020 fully synthetic 5W-20 engine oil, the engine achieves the highest levels of power, torque and efficiency. This eliminates the number of waste oils.

Pros:

  • Motor protection against wear and tear
  • Elimination of emissions
  • Maximum fuel consumption
  • High level of performance

Cons:

  • It works best with gasoline engines

9. Toyota Genuine SAE 5W-20 946 ML Motor OIl

Buy Toyota Genuine SAE 5W-20 946 ML Motor OIl

View on Amazon

Engine oil containing carefully selected additives for optimal performance. Its lubricating properties are maintained even when driving intensively due to the quality of the base oil and additives used.

TOYOTA 5W30/5w-20 prevents soot and soot deposition, helps to keep the engine clean and ensures excellent condition of glands.

Toyota 5W-30/5w-20 oil guarantees easy starting and lubrication of the engine in cold weather and is an oil of exceptional quality with excellent performance.

Oil with high quality additives, supports excellent engine performance and low fuel consumption, so it is the most common oil.

Advanced technologies and new materials are used to produce more advanced and complex vehicle mechanisms. All original Toyota engine oils meet not only international API (American Petroleum Institute) standards, but also the strictest quality and performance requirements.

Pros:

  • Formulated to protect Toyota metal and gasket surfaces from corrosion with an oil film.
  • 4-point depressants maintain flowability in cold climates.
  • Viscosity index improvers stabilize viscosity over a range of operating temperatures.
  • Oxidation inhibitors resist the formation of oxidants that increase viscosity and reduce flowability

Cons:

  • None

10. Idemitsu 30010099-95300C020 Full Synthetic 5W-30 Engine Oil

Buy Idemitsu 30010099-95300C020 Full Synthetic 5W-30 Engine Oil

View on Amazon

The container contains 5 quarts. In addition to 5w-20, it provides the engine with amazing protection against wear. The high piston cleanliness reduces green gas emissions. This protects the emission control systems and eliminates fuel consumption. It minimizes the formation of deposits, even under complicated conditions.

It contains turbos and is designed for powerful engines. With the specific technology, the engine serves long time.

Pros:

  • Eliminated gas emissions
  • Reduced fuel consumption
  • Durable engine service
  • Long service life

Cons:

  • It’s pretty expensive

Best semi synthetic oil for Toyota 4runner

11. Castrol 03093 GTX 10W-30 Motor Oil

Buy Castrol 03093 GTX 10W-30 Motor Oil

View on Amazon

TriShield is a unique triple action technology that attracts traps and distributes particles that can accumulate in engines and cause sludge build-up. TriShield prevents small particles from becoming big problems and protects the car you can rely on. This innovative technology uses a polymer that contains two chemical hooks that attract and trap both sludge and soot in a single molecule to help prevent particle formation. With TriShield Technology, Castrol has improved the effectiveness and protection offered by GTX.

Pros:

  • Unique TriShield technology actively protects against particles that accumulate in car engines with the most advanced mud control ingredients.
  • Castrol GTX uses high quality, tailor-made additives and is the most advanced conventional oil on the market.
  • Maximum protection against viscosity and thermal degradation
  • Extreme cleaning power helps to avoid deposits.

Cons:

  • None

12. Pennzoil Platinum Full Synthetic Motor Oil 10W-30

Buy Pennzoil Platinum Full Synthetic Motor Oil 10W-30

View on Amazon

This is a fully synthetic engine oil that your car will surely thank you for using. Why? Well, it is known to car enthusiasts for its amazing lubricating and cleaning properties.

All thanks to patented PurePlus technology, which converts pure natural gas into fully synthetic engine oil. Pennzoil’s process results in an industry-leading 99.5% pure base oil. The science of why this is better is quite complex, but basically the purity allows additives applied to the base to do their job even better.

The results are amazing to say the least. Tests show that your pistons are up to 25% cleaner than Mobil 1 synthetic oil and 35% cleaner than similar Valvoline products. This means amazing fuel economy, minimal engine energy loss and superior protection against friction.

It is so good that Pennzoil is ready to give you a warranty that covers up to 500,000 miles or 15 years (whichever comes first) as long as you use only their synthetic oil.

Pennzoil’s attention to purity requires that this product at least be considered. Finally, if it gives your car more fuel economy, it will also save money. In fact, Pennzoil guarantees that you will get an average of 550 miles more out of your vehicle per year compared to a dirty engine. That is impressive.

Pros:

  • The patented PurePlus technology ensures excellent base oil purity.
  • Extremely good cleaning and lubricating properties for high fuel consumption
  • Generous warranty

Cons:

  • Slightly more expensive than the market average

13. Valvoline 779462 Automotive Accessories

Buy Valvoline 779462 Automotive Accessories

View on Amazon

This synthetic blend oil is all about making your older engine run as if it were brand new.

The secret sauce lies in Valvoline’s exclusive formula, which contains additives that are perfect for aging engines.

These include:

  • Antioxidants to prevent oil degradation
  • Additional cleaning agents for powerful engine cleaning
  • Additional wear protection to prevent future engine wear
  • Sealing conditions to rejuvenate engine seals that have been weakened over time.

In fact, the additives target the four main causes of engine failure – leaks, deposits, friction and sludge. The Valvoline team recommends using this oil as soon as your engine exceeds 75,000 miles.

This oil was very well received by new and older customers of the Valvoline brand. In addition, do not worry if your vehicle does not meet the specific SAE of 5W-30, as there are several qualities.

It is as simple as this: If you have an older engine that needs thrust, Valvoline MaxLife is a good choice.

Pros:

  • Specially designed for engines with high mileage under sealing conditions and antioxidants.
  • Very economical
  • Trustworthy and well received brand

Cons:

  • Most suitable if you have an older engine, although new engines can still use the oil.
  • Synthetic mixed oil is cheaper, but not as good as fully synthetic oil.

Toyota 4runner motor oil recommendations

If your Toyota vehicle uses 0w-20 synthetic oil, the manufacturer has approved an oil change interval of 10,000 miles or 12 months. Vehicle owners using this type of oil should check the engine oil level regularly and top it up if necessary. This allows the synthetic oil to be most effective. It is important to note that if you are driving a Toyota Tundra or Toyota Sequoia equipped with a Flex fuel compatible engine, the 10,000-mile oil change interval has NOT been approved by Toyota.

Some engines will be tuned for operation with 5w-20 mineral oil, but can safely use 0w-20 synthetic oil. These engines will continue to require the oil change interval of 5,000 miles/six months even if the synthetic oil is used.

Toyota 4runner engine oil type

I always run synthetic oil in all my cars and Mobil 1 is the most common synthetic oil in most shops. For my Toyota 4Runner oil change 2001, the manual requires 6 liters of 5W-30 engine oil. For my 4Runner, I switched to the extended power of Mobil 1 5w-20 to see if I could get better fuel economy with a slightly thinner oil. This is the oil weight Toyota prescribes for the newer 4Runners. It says it is designed for up to 15,000 miles, but I will turn it off at 5,000 as usual.

Toyota 4Runner engine oil capacity (USA)

Model:Β Toyota 4Runner, N180 (1996 – 2002) (USA)

Engine Capacity/Filter Oil Change Intervals
4Runner 2.7 4WD (USA) (RZN185) (1996 – 1997) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
Advertisements
4Runner 2.7 4WD (CAN) (RZN185) (1996 – 1997) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 2WD (USA) (RZN180) (1996 – 1997) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 2.7 2WD (CAN) (RZN180) (1996 – 1997) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 2WD (USA) (RZN180) (1999 – 2000) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 2.7 4WD (CAN) (RZN185) (1998 – 1998) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 4WD (USA) (RZN185) (1998 – 1998) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 2.7 2WD (CAN) (RZN180) (1998 – 1998) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 2WD (CAN) (RZN180) (1999 – 2000) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 2WD (USA) (RZN180) (1998 – 1998) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 2WD (USA) (VZN180) (1996 – 1997) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
4Runner 2.7 4WD (CAN) (RZN185) (1999 – 2000) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 2.7 4WD (USA) (RZN185) (1999 – 2000) 3RZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 2WD (CAN) (VZN180) (1996 – 1997) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 6 000 km / 6 months
4Runner 3.4 4WD (USA) (VZN185) (1996 – 1997) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 4WD (CAN) (VZN185) (1996 – 1997) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 3.4 2WD (USA) (VZN180) (1998 – 1998) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
4Runner 3.4 2WD (CAN) (VZN180) (1998 – 1998) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 6 000 km / 6 months
4Runner 3.4 4WD (USA) (VZN185) (1998 – 1998) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 4WD (CAN) (VZN185) (1998 – 1998) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months
4Runner 3.4 2WD (USA) (VZN180) (1999 – 2001) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
4Runner 3.4 4WD (USA) (VZN185) (1999 – 2001) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 2WD (CAN) (VZN180) (1999 – 2001) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 3.4 4WD (CAN) (VZN185) (1999 – 2001) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 8 000 km / 6 months
4Runner 3.4 2WD (USA) (VZN180) (2002 – 2002) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
4Runner 3.4 4WD (USA) (VZN185) (2002 – 2002) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 7 500 miles/ 6 months
4Runner 3.4 2WD (CAN) (VZN180) (2002 – 2002) 5VZ-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 3.4 4WD (CAN) (VZN185) (2002 – 2002) 5VZ-FE 5.4 l 5.71 US Quarts / Filter: 0.7 l 0.74 US Quarts 8 000 km / 6 months

Model:Β ToyotaΒ 4Runner, N210 (2003 – 2009)Β (USA)

Engine Capacity/Filter Oil Change Intervals
4Runner 4.0 V6 24V 2WD (USA) (GRN210) (2003 – 2003) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
Advertisements
4Runner 4.0 V6 24V 2WD (USA) (GRN210) (2004 – 2004) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 4WD (CAN) (GRN215) (2003 – 2003) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 4WD (USA) (GRN215) (2003 – 2003) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 7 500 miles/ 6 months
4Runner 4.0 V6 24V 2WD (CAN) (GRN210) (2003 – 2003) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 2WD (CAN) (GRN210) (2004 – 2004) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 4WD (USA) (GRN215) (2004 – 2004) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 4WD (CAN) (GRN215) (2004 – 2004) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 2WD (USA) (GRN210) (2005 – 2005) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 2WD (CAN) (GRN210) (2005 – 2005) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 4WD (USA) (GRN215) (2005 – 2005) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 4WD (CAN) (GRN215) (2005 – 2005) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 2WD (USA) (GRN210) (2009 – 2009) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 4WD (CAN) (GRN215) (2006 – 2008) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 4WD (USA) (GRN215) (2006 – 2008) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 2WD (CAN) (GRN210) (2006 – 2008) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 2WD (USA) (GRN210) (2006 – 2008) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 2WD (CAN) (GRN210) (2009 – 2009) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 24V 4WD (USA) (GRN215) (2009 – 2009) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 5 000 miles/ 6 months
4Runner 4.0 V6 24V 4WD (CAN) (GRN215) (2009 – 2009) 1GR-FE 5.2 l 5.49 US Quarts / Filter: 0.3 l 0.32 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 2WD (USA) (UZN210) (2003 – 2003) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 7 500 miles/ 6 months
4Runner 4.7 V8 32V 2WD (CAN) (UZN210) (2003 – 2003) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 4WD (USA) (UZN215) (2003 – 2003) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 7 500 miles/ 6 months
4Runner 4.7 V8 32V 4WD (CAN) (UZN215) (2003 – 2003) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 2WD (USA) (UZN210) (2004 – 2005) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 2WD (CAN) (UZN210) (2004 – 2005) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 4WD (USA) (UZN215) (2004 – 2005) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 2WD (USA) (UZN210) (2006 – 2008) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 4WD (CAN) (UZN215) (2004 – 2005) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 2WD (CAN) (UZN210) (2006 – 2008) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 4WD (USA) (UZN215) (2006 – 2008) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 4WD (CAN) (UZN215) (2006 – 2008) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 2WD (USA) (UZN210) (2009 – 2009) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 4WD (USA) (UZN215) (2009 – 2009) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months
4Runner 4.7 V8 32V 2WD (CAN) (UZN210) (2009 – 2009) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.7 V8 32V 4WD (CAN) (UZN215) (2009 – 2009) 2UZ-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months

Model:Β Toyota 4Runner, N280 (2010 – ) (USA)

Engine Capacity/Filter Oil Change Intervals
4Runner 2.7 2WD (CAN) (TRN280) (2010 – 2011) 2TR-FE 5.8 l 6.13 US Quarts / Filter: 0.7 l 0.74 US Quarts 16 000 km / 12 months
4Runner 2.7 2WD (USA) (TRN280) (2010 – 2010) 2TR-FE 5.8 l 6.13 US Quarts / Filter: 0.7 l 0.74 US Quarts 5 000 miles/ 6 months
Advertisements
4Runner 4.0 V6 4WD (CAN) (GRN285) (2010 – 2010) 1GR-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 8 000 km / 6 months
4Runner 4.0 V6 4WD (CAN) (GRN285) (2011 – ) 1GR-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 16 000 km / 12 months
4Runner 4.0 V6 4WD (USA) (GRN285) (2010 – ) 1GR-FE 6.2 l 6.55 US Quarts / Filter: 0.5 l 0.53 US Quarts 5 000 miles/ 6 months

Engine oil grades for Toyota 4runner

SAE 0W-20 is the best choice for good fuel economy and a good start in cold weather. If SAE 0W-20 is not available, SAE 5W-20 can be used. However, it must be replaced with SAE 0W-20 at the next oil change.

Toyota 4runner engine oil price

The average cost of a Toyota 4Runner oil change is between $112 and $142. The labor costs are estimated between 37 and 48 US dollars, while the parts are between 75 and 94 US dollars. The quote does not include taxes and fees.

CONCLUSION

Although there are some cars that make it a little easier to change the oil, the oil in the 4Runner can be changed relatively easily and in a short time.

Since the 4Runner is able to drive in some pretty rough areas, you need to take the time to maintain your vehicle as well as possible and avoid possible damage.

If you take the time to change your oil every 5,000 miles with a high quality plastic like Mobil 1, you will only benefit from the performance, durability and reliability of your vehicles on the trail and on the open road.

Best oil for Toyota 4runner Video

Best oil for Toyota 4runner
5 (100%) 2 vote[s]
David Muench (Carnes Mechanical)

David Muench (Carnes Mechanical)

Hey, I’m David. I’ve worked in a cars store for 6 years. I write reviews and guides, helping people to choose the most suitable technicals and best product for them. I’m happy to finally share my knowledge of the industry here, on CarnesMechanical.

Leave a Reply