What oil to use in Kawasaki Lawn Mower
When selecting oil, the following main factors are taken into account:
- ensuring engine cooling, protection against thermal shock;
- operation at high rpm and under high loads;
- resistance to corrosion when the mower is not in use in winter;
- absence of soot and sulfate ash, smokeless;
- environmental friendliness;
- good solubility in petrol;
- long storage time of the prepared lubricant.
The oil in your lawnmower must meet the requirements of Biodegradability, Omni-seasonality, and economy. 2-stroke motors require a blend in the manufacturer’s recommended oil to gasoline ratio recommended by the manufacturer. For 4-stroke Four-stroke engines do not need to be mixed and the ingredients are poured For four-stroke engines, the ingredients are poured separately into different containers. Lubrication is done with the help of oil tubing, pump, filter, and valves.
The types of oils used to produce the lubricant are, which are more suited to 2-stroke engines:
The fluid contains 5-15% of various additives designed to increase efficiency, slow down corrosion and viscosity stabilization. Lawnmowers with 4-stroke engines require a simple automotive fluid, like SAE30 or 10W40 with suitable performance characteristics. An important characteristic of oil for 4-stroke lawnmowers is its long-term stability. For winter operations, a frost-resistant fluid is used.
Oil for Kawasaki Lawn Mower – Best Choice
How to choose oil for Kawasaki lawn mower engines
Best 5 Oils for Kawasaki Lawn Mower Engine
AmazonBasics High Mileage Motor Oil
Valvoline High Mileage Synthetic Blend Motor Oil
Kawasaki Engine Oil 10W40
Kawasaki SAE 10W-30 4-Cycle Engine Oil
Kawasaki SAE 20W-50 4-CYCLE OIL
Changing the oil in the lawnmower yourself – How to do it
To maintain engine performance, it’s important to give your lawnmower an oil change at least once a year. Here are two instructions on how to do it.
Open the oil drain plug
Like any other gardening tool, you obviously need to take care of your lawnmower. This includes not only cleaning the lawnmower and sharpening the blade but also properly winterizing it and maintaining it. This, in turn, includes changing the oil. You should change the oil once a season, or after 25 working hours at the latest.
There are basically two ways to do this. First, you can tilt your lawnmower and open the drain plug to drain the oil. Secondly, and this is also the more environmentally friendly option, you can also change the oil using an oil change kit. In this case, the oil is pumped out with a syringe. Instructions for both variants are given below.
Changing the oil by opening the drain plug
- Step 1:
You should always change the oil when the lawnmower is warm. So now this means that you should start your lawnmower and let it run for a few minutes. After that, turn the engine off again.
- Step 2:
Now disconnect the ignition cable and be sure to secure it at a safe distance from the spark plugs. In this way, you will avoid an unintentional start and thus also an accident.
- Step 3:
Now tilt your lawnmower so that the oil can collect above the drain plug and ideally place a sheet of foil or newspaper under the lawnmower.
- Step 4:
Now place a collection container under the drain plug and open it. Then allow all the oil to drain out.
- Step 5:
Once all the old oil has drained out, you can now top it up with the right amount of the correct oil (refer to your lawn mower’s owner’s manual for instructions).
Change the oil with the help of an oil change kit
- Step 1:
Oil change kit with a syringe. Let the engine warm-up and then disconnect the ignition cable again to be on the safe side.
- Step 2:
Now take the syringe of the oil changeset to hand and guide the hose into the oil tank.
- Step 3:
Draw all the oil out of the tank with the syringe and put it into the bottle provided.
- Step 4:
Now you can already top up with the new oil (available here, for example) and screw the tank shut again.
To perform an oil change on the lawnmower itself is not difficult at all. Nevertheless, you should rather rely on the variant with the oil change kit. The reason: If you tilt your lawnmower to remove the oil, then usually something always runs off. If you do this directly in the garden, then of course it’s not exactly environmentally friendly. In addition, the lawnmower is then also smeared after the oil change. Nevertheless, it is of course up to you how to change the oil.